Installation and Operation, cont’d
Extron
DVS 406
MENU
Input
Configuration
MENU
Output
Configuration
MENU
Audio
Configuration
MENU
Memory
Presets
NEXT |
| IN #4 | SAVE as |
|
| NEXT |
|
|
| IN #4 | Clear |
|
| NEXT |
| ||||||
|
| <N/A> 1 | 2 3 |
|
|
|
|
|
| <N/A> 1 | 2 3 |
|
|
|
| ||||||
|
|
|
|
|
|
|
|
| |||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Saving (SAVE) memory presets | Clearing (Clear) memory presets | ||||||||||||||||||||
• | Save the currently selected input's | • Clear the currently selected input's saved | |||||||||||||||||||
| sizing and centering information |
| sizing and centering information | ||||||||||||||||||
• | Up to 3 presets per input can be | • | Up to 3 presets per input can be selected | ||||||||||||||||||
| selected < > (N/A is the default) and |
| < > (N/A is the default) and cleared. | ||||||||||||||||||
| saved. |
|
|
|
|
|
|
| • | Clear a preset by pressing the NEXT | |||||||||||
• | Save a preset by pressing the NEXT | ||||||||||||||||||||
| button. This submenu will also return to | ||||||||||||||||||||
| button. This submenu will also |
|
|
|
| the Memory preset menu. |
|
| |||||||||||||
| advance to the Clear submenu. |
|
|
|
|
|
|
|
|
|
| ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Save (SAVE) memory presets
From this submenu, the sizing and centering information for the currently selected input can be saved to memory. Up to three memory presets can be saved per input: presets 1, 2, and 3.
Using either the horizontal Adjust (
) or vertical Adjust (
) knob, select (< >) either N/A, 1, 2, or 3 to select a preset. The default is <N/A>. To save the preset, press the NEXT button.
Clear memory presets
From this submenu, up to three saved presets for the currently selected input can be cleared from memory.
Using either the horizontal Adjust (
) or vertical Adjust (
) knob, select (< >) either N/A, 1, 2, or 3 to select a preset. The default is <N/A>. To clear the preset, press the NEXT button.
Recalling a preset
Recalling an input’s saved preset requires that the input be selected and that the input button be then pressed successively to recall any saved preset (up to three saved presets). The available presets are sequentially selected in a loop*: preset 1, preset 2, preset 3, preset 1, preset 2, and so forth, depending on which presets are available.
Each saved preset will display the LCD message “Input #X Memory Y” where “X” refers to the input (2 to 6) and “Y” refers to the preset (1 to 3). The absence of any saved presets will not display the LCD message for the missing preset.
*The actual presets will depend on what presets (1, 2, or 3) have been saved for an input. For example, if only presets 1 and 3 are available, the sequential looping of the presets as the input button is repeatedly pressed, will be: preset 1, preset 3, preset 1, preset 3, and so forth.