Magnavox 22MF339B 5Energy Saving Mode, Auto Adjustment, Horizontal Position, Vertical Position

5Adjust the setting.

Auto Adjustment

Use [Cursor K/L] to select “Adjust”, then press [OK].

PICTURE		Cancel
SOUND	To automatically synchronize the	Adjust
SETUP	phase and clock on the TV and PC.
FEATURES
LANGUAGE

•The horizontal/vertical position, clock and phase of the PC screen are automatically adjusted.

Horizontal Position, Vertical Position

Use [Cursor s/B] to adjust.

			Cursor s	Cursor B
Horizontal Position			to move PC	to move PC
H. Position	0	-
			+	screen right
Adjust		Move	screen left
			OK OK
Vertical Position			to move PC	to move PC
V. Position	0	-
			+	screen up
Adjust		Move	screen down
			OK OK

Clock, Phase

Use [Cursor {/B] to adjust “Clock” setting to stabilize the PC screen and “Phase” setting to improve the clarity of the PC screen.

					Cursor s	Cursor B
Clock
	Clock	0
	Adjust		Move	OK OK	to decrease	to increase
Phase					setting value	setting value
	Phase	0
	Adjust		Move	OK OK

6Press [MENU] to exit.

You can set whether the power consumption is saved or not.								INTRODUCTION
5Energy Saving Mode
								PREPARATION
1 Press [MENU] to display the main menu.
2 Use [Cursor	K	/L] to select “FEATURES”, then press
								WATCHING
[OK].
								TV
			PICTURE		Closed Caption
			SOUND		Child Lock
			SETUP		PC Settings
					Energy Saving Mode		On
			FEATURES
			LANGUAGE		Location		Home
					Current Software Info			OPTIONAL
								SETTING
3 Use [Cursor	K	/L] to select “Energy Saving Mode”, then
press [OK].
								TROUBLESHOOTING
			PICTURE		Closed Caption
			SOUND		Child Lock
			SETUP		PC Settings
			FEATURES		Energy	Saving Mode	On
			LANGUAGE		Location		Home
					Current Software Info
								INFORMATION
4 Use [Cursor	K	/L] to select the desired mode, then
press [OK].
			PICTURE				On
			SOUND	When set to “On”,power consumption is			Off
			SETUP
				reduced by decreasing backlight brightness.
			FEATURES
			LANGUAGE

On	Select if you want to reduce the power
	consumption.
Off	The power consumption may possibly
	exceed the limited requirement of the
	ENERGY STAR® qualification.

Note:

•You may not obtain an appropriate screen with

“Auto Adjustment” for some signals. In this case, adjust the settings manually.

•Adjust “Phase” setting after “Clock” setting has been properly adjusted.

5Press [MENU] to exit.

31

EN