To access the motorized lens controls, use the FOCUS, ZOOM and LENS buttons on the
Alternatively, select Display Device from the Service Menu. Select Configure, then Lens from the Display Device menu. The Lens menu gives you a great deal of control over the picture size, position and focus:
3.10 Primary Lens Adjustments
To focus the projected image, use the cursor buttons to highlight “In” or “Out.” Then, | Focus |
press and hold the ENTER button on the remote control. |
|
To make the picture smaller (zoom out), use the cursor buttons to highlight the minus sign | Zoom |
| |
To enlarge the picture (zoom in), use the cursor buttons to highlight the plus sign (+). |
|
Then, press and hold the ENTER button on the remote control. |
|
To change the projected image position, use the cursor buttons to highlight “Left,” | Vertical and Horizontal |
“Right,” “Up” or “Down” in the Lens menu. Then, press and hold the ENTER button to | Lens Shift |
shift the image in that direction. |
|
Runco | 37 |