Runco CX-70DHD operation manual Enter key, Exit Return key

External Control

Table 6-1. Serial Commands (continued)

Command	Parameter	Value		Description
	(min/max)	Stored?
	Miscellaneous Commands
DISPLAY?	NA	NA	Returns display device input source
			value, as follows:
			1	= Auto
			37 = CX-70DHD
INRES?	NA	NA	Returns input resolution
MODEL?	NA	NA	Returns product model name
OUTRES?	NA	NA	Returns output resolution
SERNUM?	NA	NA	Returns DHD Controller serial number
SWVER?	NA	NA	Returns software version number
SYSSTATE?	0/4	NA	Returns current system state
			0	= Off
			1	= Initializing
			2	= On
			3	= Powering Down
			4	= Error
TRIGGER	1/3	YES	Assigns trigger to currently-selected
			aspect ratio

The following serial commands are meant to emulate buttons on the remote control or DHD Con- troller front panel. Each button has its own serial command, so effectively it is as if you were using the IR remote only you’ll be doing so via serial commands. These commands provide active OSD responses just like the IR remote.

DOWN	NA	NA	Down-Arrow ( ) key
ENTER	NA	NA	ENTER key
EXIT	NA	NA	EXIT (RETURN) key
LEFT	NA	NA	Left-Arrow ( ) key
MENU	NA	NA	MENU
RIGHT	NA	NA	Right-Arrow ( ) key
UP	NA	NA	Up-Arrow ( ) key

CX-70DHD Installation/Operation Manual 63