Basic Operations
Selecting an Aspect Ratio
1.Press the MENU button on the remote control.
2.Press the ▲▼ buttons to select Aspect Ratio and then press the ENTER or ► button.
3.Select the appropriate Aspect Ratio by pressing the ▲▼ buttons and then press the ENTER or ► button.
•You can select Anamorphic, Standard, Letterbox or VirtualWide.
4.Press the MENU button to return to the previous menu.
OR
You can also select the Aspect Ratio directly from the remote control using discrete Aspect Ratio buttons.
Runco CR-32HD
Source
Aspect Ratio
Picture Adjust
Audio
Channel
Timer
Setup
ISF Calibration
>Anamorphic Standard Letterbox VirtualWide
100 |
| 0 | TIMER | |
| OFF | |||
| SOURCE |
| ||
INPUT | INPUT | INPUT | INPUT | |
1 | 2 | 3 | 4 | |
DVI |
| RGB | TV | |
|
| HD |
| |
SLEEP | MEMORY | DISPLAY | ||
CUST |
| ISF | ISF | |
| NT | DAY | ||
|
| |||
| ASPECT RATIO |
| ||
ANA | 4X3 | LET | VWIDE | |
BOX | ||||
|
|
| ||
CHANNEL UP
ANAMORPHIC mode
The Anamorphic aspect ratio expands the image in the horizontal direction. The image is compressed vertically, but with anamorphic software the image will appear properly proportioned. This is best suited for use with 16:9 DVD’s and HDTV.
STANDARD 4:3 mode
The image is displayed at a standard 4:3 aspect ratio. The input signal will be scaled to fit in the center of the 16:9 screen.
LETTERBOX mode
The image in the Letterbox mode will be zoomed in, and the top and bottom portion ‘blanked off.’ This ratio is best suited for LaserDisc movies or
VIRTUALWIDE mode
The VirtualWide mode is an aspect ratio is designed to fill the 16:9 screen with a 4:3 image. The center of the picture is not stretched, and it gradually stretches on the sides reaching the most extreme stretch at the far edges of the picture
Active Image Area
Active
Image
Area
Active Image Area
Active
Image
Area
18