Controlling Sound Volume
CONTROLLING SOUND VOLUME
RECEIVER VOLUME CONTROL
The receiver may have its own volume control. When you first install such a receiver, it is set up so that the remote cannot control the receiver sound volume. You can set up the receiver so that the remote can control the receiver sound volume.
Note: You should use the receiver remote to control the sound volume for normal viewing. But, if you are recording a program using a VCR, and you change the sound volume using the receiver remote, the volume recorded also will change. So, you may want to set up the receiver so that only the TV remote can control the sound volume. Then, when you use the TV remote to change the volume, the volume recorded will not change. When you are finished recording, make sure to change the receiver setup back so that the receiver remotecan control the sound volume.
To change the way sound volume is controlled, do the following:
Note: This procedure shows examples of menu options. The options that you see may differ.
1.Use the TV remote control to make sure that the TV sound volume is not turned down or muted.
Note: If you turn down or mute the TV sound volume using the TV remote, the receiver remote cannot restore the volume even if the receiver is set up so that the remote should be able to do so.
2. Press the Menu button.
3. Select the System Setup option.
4.Select the Volume Control option.
Note: If the System Setup menu does not
display this option, the receiver does not have its own volume control.
5.Select the TV remote volume control or the DISH remote volume control option.
6. Select the Save option.
7.If you are setting up the remote control for the first time, see Controlling a Device on pag e15. In step 4 of that procedure, use code 222 in TV mode to set up the remote to control the receiver, including the receiver sound volume.
18 | 104333 |