Xantrex Technology RC/GS RC7 owner manual Remote Setup, LCD Contrast

Configuration

Set Shore Power:	Set Shore Power:	Set Shore Power:	Set Shore Power:
30A or more	25 Amps	10 Amps	5 Amps

Figure 3-7Set Shore Power menu items

Remote Setup

The Remote Setup screen displays system status and error messages that occur during normal operation. From the Setup menu you can select:

•Last Key (default) to display the last system status message displayed after exiting the Setup menu.

•Rolling Display to automatically show system status, state-of-charge, time left to run, time left to charge, set shore power and gen start/stop (RC/GS only).

•Power Saver to shut off the screen and LEDs after five minutes without a button press or new error message. Pressing any key will reactivate the screen and LEDs for another five minutes. Errors during the power saver mode will “wake up” the remote.

Remote Setup:	Remote Setup:	Remote Setup:
Last key	Power Saver	Rolling Display

Figure 3-8Remote Setup menu items

LCD Contrast

You can use the LCD Contrast menu to adjust the screen contrast to accommodate changing lighting conditions and viewing angle. The default setting is Maximum Contrast.

16 975-0210-01-01