Xantrex Technology RC/GS RC7 owner manual Float Charging, Equalizing Charging

Page 48

Operation

Float Charging

When the charger is in the Float mode, the screen shows “Float Charging” and the Charge LED quickly flashes. At this point the batteries are fully charged (100%) and the Batt. Full LED is on solid.

Inverter

Charge

Batt. Full

Error

System Status: Float Charging

822-4A-001

Charge LED quickly flashes. Batt Full LED is on solid.

Figure 4-11Float Charging Mode

Equalizing Charging

To activate the Equalize mode, press and hold the Settings button (right arrow) until the screen clears and “Equalizing” appears (approximately 6 seconds). The Charge LED will increase its flashing rate to approximately 8 flashes per second (flickering). The Equalize charge will continue for 3 hours and then automatically change back to Float.

To cancel Equalize mode, press and hold the Settings button for approximately 6 seconds. If Equalization is cancelled, the screen will indicate the System Status as Absorption chg for approximately 30 seconds before returning to Float charging.

CAUTION

Equalizing the batteries should only be done when the batteries are fully charged (i.e., from Float mode) and only on flooded lead acid or AGM batteries. Vent caps on batteries (lead acid only) should be removed prior to running the Equalize mode.

36

975-0210-01-01

Page 47 Page 49
Image 48
Page 47 Page 49
Contents RV Series Remote Control Page RV Series Remote Controls Date and Revision Purpose Scope AudienceOrganization Conventions Used Related InformationImportant Safety Instructions General PrecautionsExplosive gas precautions Contents Operation Warranty and Return Information Page Introduction Features 1RC/GS Front Panel2Remote Control Cable Types Indicators and Controls Installation Installing the RC/GS and RC7 Materials and tools requiredMounting and Connecting Choosing a location2RV Series Inverter/Charger Front Panel System Status AC Available Page Configuration Viewing the Setup Menu Changing SettingsConfiguring the RC/GS and RC7 Battery CapacitySet Idle Battery Type Battery Capacity SettingsSet Shore Power Max Charge RateRemote Setup LCD ContrastSet Clock RC/GS Only Select Genset RC/GS OnlyGenerator Start RC/GS Only 11Select Genset menu itemsGenerator Stop RC/GS Only 13Generator Start/StopThermostat Start Enable and Disable RC/GS Only 15Generator Start/Stop on Generator Start menuBegin Gen Quiet and End Gen Quiet RC/GS Only 17Begin Generator Quiet Time displaySaving Setup Choices 19Setup/Menu Item ButtonsRC/GS and RC7 Setup Menu Summary RV Series Inverter/Charger and RC/GS and RC7 SetupAuto Gen Start Setup RC/GS Only Operation Status LEDs Status LEDsInverter LED Charge LEDError LED LCD ScreenBatt. Full LED Meter Mode ButtonsOn/Off System Status Displays AC Source MessagesWaiting for AC Genset Status Pending, Cranking and Restart RC/GS OnlyStarter Cooldown and Gen Start RC/GS Only Genset Status Starter CooldownGenset Error Messages RC/GS Only Gen Quiet FaultGen Won’t Start 5Gen Quiet Fault Error Message Inverter Mode Messages System Status InvertingCharger Mode Messages Bulk ChargingAbsorption Charging Float Charging Equalizing ChargingInverter/Charger Error Messages 12Equalizing ModeOver Temperature OverloadHigh Battery Voltage Low Battery VoltageCharger Fault Charger FaultBattery Voltage Meters DisplayAverage Shunt Amps Inverter/Charger Current AC Output VoltageAC Input Amps Battery State of Charge System Status MessagesSet Shore Power Generator Start/Stop RC/GS OnlyStorage Checklist Preparation for StorageRC/GS and RC7 User’s Menu Summary Generator Status Messages RC/GS OnlySystem Status Display Page Warranty and Return Information WarrantyWarranty and Return Disclaimer ProductExclusions Return Material Authorization Policy Return ProcedureOut of Warranty Service Information About Your System Serial Number Purchased From Purchase DatePage Xantrex Technology Inc

RC/GS RC7 specifications

The Xantrex Technology RC/GS RC7 is an advanced remote control panel designed for use with Xantrex inverters and battery chargers. With its sleek design and user-friendly interface, the RC7 offers an intuitive way to monitor and manage power systems in various applications such as RVs, boats, and off-grid solar setups.

One of the main features of the RC7 is its high-resolution LCD screen, which provides clear and detailed information about the system's performance. Users can easily access vital data such as battery voltage, inverter status, charging levels, and overall system health at a glance. This enables quick assessments and troubleshooting, ensuring that the power system operates efficiently.

The RC7 incorporates advanced communication technologies, allowing for seamless integration with Xantrex inverters and other components. It uses an RS-485 communication protocol, which enhances reliability and minimizes data loss over long distances. This technology also allows multiple devices to be connected to a single panel, simplifying the monitoring of complex setups.

Another notable characteristic of the RC7 is its customizable settings. Users can configure alarm thresholds for battery levels and voltage, ensuring that they are alerted in case of any issues. This feature is essential for maintaining battery health and extending lifespan, as it prompts users to take necessary actions before a critical failure occurs.

Moreover, the RC7 provides real-time data logging, enabling users to track their energy consumption and production over time. This data is invaluable for optimizing energy usage and making informed decisions about power management. The panel is also equipped with programmable features that enhance flexibility, allowing users to set operation modes according to their specific needs, whether it's boosting the charge during peak sunlight hours or managing loads effectively.

In terms of build quality, the RC7 is robust and designed to withstand various environmental conditions, making it suitable for both marine and outdoor applications. Its installation process is straightforward, with clear instructions, making it accessible for users who may not have extensive technical skills.

In summary, the Xantrex Technology RC/GS RC7 stands out for its high-resolution display, advanced communication capabilities, customizable settings, and robust design. It serves as a vital tool for anyone looking to optimize their power management systems, combining technology with user-centric functionality. This ensures users can monitor their energy needs effectively, contributing to a more sustainable energy future.
Top Page Image Contents