System Status Displays
High Battery Voltage
The “Hibat/Stop Chrg” System Status message appears when the battery voltage rises above 15.7 V. This condition usually occurs only when a charging source other than the RV Series Inverter/Charger is used to charge the battery bank. Switch off any charging sources other than the RV Series Inverter/ Charger to allow the voltage level to drop. The inverter automatically resets and resumes operation when the battery voltage falls below 15.4 V.
Inverter
Charge | System Status: | ! |
Batt. Full | Hibat/Stop Chrg | |
| ||
Error | Error Condition Remedy | Buzzer sounds |
| ||
| (press arrow | |
| Error LED ON | button to cancel) |
Figure 4-15 High Battery Voltage Error Message
Low Battery Voltage
The “Lobat/Start Chrg” System Status message appears when the battery voltage drops below 10.5 volts. The red Error LED illuminates and the buzzer sounds. The inverter shuts off to prevent damage to the batteries. Provide an AC supply (such as shore power or a generator) to the inverter/charger to automatically start charging the batteries.
Inverter
Charge | System Status: | ! |
Batt. Full | Lobat/Start Chrg | |
| ||
Error | Error Condition Remedy | Buzzer sounds |
| ||
| (press arrow | |
| Error LED ON | button to cancel) |
Figure 4-16 Low Battery Voltage Error Message
39 |