Operation
System Status Displays
The RC/GS and RC7 remote controls display the operating mode and system status by lighting one or more LEDs and/or by displaying a message on the screen. The four LEDs reflect the same information as the single tricolored LED on the RV Series Inverter/Charger.
There are four types of system messages:
•AC source messages
•Inverter messages
•Charger messages
•Error messages.
AC Source Messages
AC source messages appear when alternating current (shore power) is present. In addition, the AC source messages describe the current activity, if any, of the generator (RC/GS only).
Waiting for AC
When the inverter is off and AC is not present, the screen displays “Waiting for AC.”
System Status:
Waiting for AC
Genset Status: Pending, Cranking and Restart (RC/GS Only)
When the RC/GS is set up to start the generator for a specified condition (battery voltage or thermostat signal) and that condition has been met, the screen shows “Pending Genstart.”
Genset Status:
Pending Genstart
30 |