Zenith HCS5610 warranty Mute Disable, Sleep Timer, Caption Lock, Poll Rate, Timing Pulse

Page 56

Installer Menu (Continued)

(Continued from previous page)

The value range is 0 to 63, with 63 as the default, which gives the user the full range of volume control, if item 008 MIN VOLUME is also set at 0. Change values with ADJ Left/Right arrow keys. It may be best to set the same value on every TV/STB.

*Note: The maximum volume level cannot have a value setting lower than the MIN VOLUME level (described previously).

010 - MUTE DISABLE

Enables or disables sound mute function. If set to 1, sound cannot be muted, mute is disabled. If set to 0, sound can be muted.

015 - SLEEP TIMER

If set to 1, the SLEEP TIMER feature may be used. If set to 0, the Sleep Timer is not available.

016 - EN TIMER (Enable On/Off Timers)

If set to 1, Timer function is available to user. Set to 0 to disable On/Off Timer functions. (Clock must be set in order to use Timers.)

017 - ALARM

Gives the installer the option of making the Alarm function available to the end user. If set to 1, Alarm function is available to end user. Set to 0 to disable the Alarm function.

*Note: Clock must be set before the Alarm function will work.

021 - V-CHIP (Parental Control)

Set to 1 to activate V-Chip (Parental Control); have it available to end user to filter and control or otherwise restrict programming content that can appear. Set to 0 to turn V-Chip feature Off, not available to user; no programming restrictions can be set.

022 - MAX BLK HRS (Maximum Block Hours)

Sets hours from 0 to 99 for the maximum V-Chip (Parental Control) block hours. Default setting is for 12 blocking hours.

023 - CAPTION LOCK

Set to 1 to restore previous caption On/Off state after turn Off. If set to 0, captions are always Off at turn On.

028 - CH. OVERIDE (Channel Override)

If set to 1, the user can select channels with either Channel up/down or by direct keypad entry. If set to 0, only those channels that are added on the channel list can be selected.

029 - OLD OCV (On Command VideoTM)

Set to 1 for operation with systems from On Command Corporation.

030 - ACK MASK

M.P.I. Communication Parameter. Leave at default setting unless changed by Pay-Per-View provider. When set to 1, changes M.P.I. for some OCV boxes.

031 - POLL RATE

M.P.I. Communication Parameter. Selects Poll Rate for M.P.I. Leave at default setting unless changed by Pay-Per-View provider. Step size of 16 ms.

032 - TIMING PULSE

M.P.I. Communication Parameter. Leave at default setting unless changed by Pay-Per-View provider. Sets baud rate. Step size of 4.3 uS.

034 - CAMPORT EN. (Camera Port Enable)

Set to 1 to enable Video 2 input on display panel. If set to 0, Video 2 input on display panel is not functional.

035 - COMPPORT EN. (Computer Port Enable)

Enable/disables display panel HDMI input jack. Set to 0 to disable, set to 1 to enable.

*Note: The setting above is ignored if Installer item 093 RJP AVAIL ABLE, is set to 1.

036 - FRONT Y/C EN. (HDMI 2 Enable)

Set to 1 to enable display panel HDMI 2 input.

Set to 0 to disable display panel HDMI 2 input.

*Note: The setting above is ignored if Installer item 093 RJP AVAILABLE, is set to 1.

038 - YPrPb EN. (Rear Component Video Enable)

Set to 1 to enable display panel rear Component Video 1 input. Set to 0 to disable display panel rear Component Video 1 input.

039 - REAR AUX EN. (Rear Aux Enable)

Set to 1 to enable display panel rear AUX (Video 1) input. Set to 0 to disable display panel rear AUX (Video 1) input.

046 - STRT AUX SRCE (Start Aux Source) Sets the starting AUX source.

Start source if start channel =0

1

= Video 1

5

= Component 2

2

= Video 2

6

= Component 1

3

= HDMI 1

7

= RGB 2

4

= RGB 1

8

= HDMI 2

(Continued on next page)

P A G E 5 6

Page 55 Page 57
Image 56
Page 55 Page 57
Contents Installation and Operating Guide Warranty B l e o f c o n t e n t s Installer quick setup guideRecord the Model Number Serial noG E Millbrook Drive Lincolnshire, IL 60069, USA. PhoneImportant Safety Instructions NEC National Electrical CodeTable of Contents Setup Checklist Installation/Connections Overview Status LED flashes while the program is runningVentilation Monitor VentilationVentilation / Installation Overview Monitor/Integrator Box Wall Mounting SystemAUX Controller Connection and Placement IR Receiver & IR Bracket InstallationMini glossary Antenna HookupG E 1 Cable Service Hookup Connect cable service to the HD Integrator Box SystemRS-232C Control Connections Viewing Equipment Setup Connect Aux Control IR Output as required of your systemDVI Hookup to RJP or DVD Player Computer PC Hookup DVITV/Monitor RJP Connections TV/MonitorAudio Connection Digital Audio Optical Connections On-Screen Menus Overview Other Menus & On-Screen Displays InfoUser Remote Control Key Functions G E 2Installer Remote Control Key Functions Number KeypadMute Channel -/+Auto Program Channel Search Channel List Channel ListChannel Control OK Enter button Press the ADJ F or G button to adjustSignal being received Clock Setup On-Off Timers SetupEnter button Use the ADJ D E F G buttons to set the Daylight SavingsTime Zone options for your local area See the nextUse the ADJ D or E button to highlight Time Zone and press Use the ADJ F or G button to select the Time ZoneUse the ADJ D or E button to highlight the Daylight Saving Press the OK Enter buttonYou can set a time for the TV to automatically turn-on Use the ADJ D E F G buttons to choose AM / PM, HoursMinutes and time period to turn-on You can set a time for the TV to automatically turn-offG E 3 Use the ADJ D or E button to highlight Auto Off and pressUse the ADJ D or E button to choose On or Off Chip OK Enter buttonEnter the 4 digits password This option sets up hour that you wish to blockUse the ADJ D or E button to highlight Set Block Hour Use the ADJ D or E button to choose 1~12 hours and pressDescription of the TV FCC Rating Codes Use the ADJ D E F G buttons to choose and set up the menuOptions for Tvpg Rating Use the ADJ D or E button to highlight the Mpaa Rating Options for Mpaa RatingDescription of the Mpaa and TV FCC Rating Codes Enter the 4digits password Use the ADJ D or E button to highlight the Can. EnglishRating and press the OK Enter button Options for Can. English RatingCanadian French Ratings E Expect No restriction. G For all Use the ADJ D or E button to highlight the Can. FrenchOptions for Can. French Rating Will be available only for digital channel signal This function operates only when TV has receivedUse the ADJ D or E button to highlight the D/L Rating Dim3 and press the OK Enter buttonWhen finished, press Menu repeatedly to remove Caption MenuTo highlight the Caption menu and press the OK Enter Press OK Enter buttonUse the ADJ D or E button to highlight Digital Mode Use the ADJ D or E button to choose Service 1-ServiceCustomize the digital captions that appear on your screen Use the ADJ D E F G buttons to customize each option FontSound Menu Use the ADJ D or E button to highlight Digital OutputUse the ADJ D / E buttons to choose Dolby Digital or PCM G E 4Use the ADJ D or E button to choose Mono, Stereo or SAP Use the ADJ D or E button to highlight Auto VolumeTo highlight the Sound menu and press the OK Enter Use the ADJ D or E button to choose English, Spanish or French and press the OK Enter buttonLanguage Control Use the ADJ D or E button to highlight and set the MenuLanguage English, Español or Français Use the ADJ D or E button to highlight Menu LanguageSet ID Use the ADJ D or E button to choose 1-99 numbers and pressColor Temperature and press the OK Enter button Picture MenuButtons to set your own settings for the options. When Use the ADJ D or E button to choose a preset screenFinished, press the Menu button Use the ADJ D or E button to choose Screen FormatUse the ADJ D or E button to choose Film Mode and press Use the ADJ D or E button to choose Noise ReductionTypical Installer Menu Commercial Mode Setup Cloning Connections/Learning Setup Turn to the next page to continue Cloning SetupG E 5 If batteries are removed, the Clone Clock time will be lostSet the Clock Optional Clone Programmer Learning SetupLearn Setup from Master TV/STB Disconnect TV/STB Power for 15 Seconds Cloning Connections / Teaching SetupTeach Master TV/STB’s Setup to the target Installer Menu Accessing the Installer’s MenuUsing the Installer’s Menu Installer Menu Items 000 throughInstaller Menu Items 035 through Detailed Descriptions of Installer Menu Items Installer SequenceMute Disable Sleep TimerCaption Lock Poll RateAUX Status RJP AvailableAtsc Tune Mode Atsc BandStart Minor Channel VID OUT FormatFilm Mode Reference TV Features / Menus that can be ClonedChannel Picture Sound Setup Caption Adding Channel Icons and Labels in the 2-5-4 + Menu Mode To Do Channel Editing/Labeling, proceed as followsChanging/Adding Channel Labels on Master TV Changing Source Labels on Master TVReference Detailed Information For Making a Master TV Detailed InstructionsProcedure to Check Software Version Reference Software Version CheckTV/STB Aux Input Configuration TV/STB Aux Input ConfigurationDisplays ‘No Signal’ message at Power Off TV/STB RS-232 Monitor Requirements / RS-232 TroubleshootingType of Connector D-Sub 9-Pin Female Connecting the cable RS-232C ControlCommunication Parameter Transmission / Receiving ProtocolKeyCommand m c To send IR remote key codeMc Set ID DataCr Data Key code Refer to page A18 Set ID OKDataxTroubleshooting Clone Programmer Troubleshooting Reference Cloning Procedure TroubleshootingReset Clone After Static Shock Troubleshooting Flow Chart Installer Quick Setup Guide G E 7Glossary of Terms OHM RF CableFor Customer Support/Service Please call Copyright 2008 LG Electronics U.S.A., IncLG’S Responsibility OWNER’S Responsibility
Top Page Image Contents