Zenith HCS5610 Atsc Band, Atsc Tune Mode, Start Minor Channel, VID OUT Format, Panel VOL PRE

Installer Menu

(Continued from previous page)

094 - SAP MENU EN (2nd Audio Program) Set to 1 to enable SAP feature, if available. Set to 0 to disable SAP feature.

096 - DEF. ASP. RATIO (Default Aspect Ratio)

Selects default aspect ratio at power up, see settings below.

Set to 0 for set by program.

Set to 1 for 4:3.

Set to 2 for 16:9 (Factory Default).

Set to 4 for Zoom 1

Set to 5 for Zoom 2

102 - ATSC BAND

Sets up TV to receive different types of incoming signals: 0=Broadcast, 1=CATV, 2=HRC, 3=IRC, 4=Same as NTSC.

103 - ATSC TUNE MODE

Selects ATSC tuning mode: 0=Virtual, 1=Physical.

Note: The setting above is ignored if Installer item 102 ATSC BAND, is set to 1=CATV, 2=HRC, or 3=IRC. Then 103 - ATSC TUNE MODE above always resets itself to Physical (1), regardless of what value appears for item 103 on the Installer menu.

104 - START MINOR CHANNEL

Sets XX-XX minor starting channel at power up: 0=NTSC. If not 0, number

selected is the Minor start channel number.

105 - VID OUT FORMAT
0=1080i	1=720p	2=480p

106 - ASP RATIO LOCK (Aspect Ratio Lock)

Set to 1 to retain previous aspect ratio with power Off.

Set to 0 to retain default aspect ratio with power Off. See item 96 Default Aspect Ratio above.

107 - BANNER SELECT Not applicable.

108 - PANEL COM (Newer display panels set at 2) Sets the panel baud rate.

110 - PANEL DELAY (Newer display panels set at 8) Sets the panel delay time.

111 - PANEL VOL PRE

Preset panel volume to achieve the same volume levels as other systems.

112 - PANEL STRT VOL

Panel start volume when on Aux. input.

113 - PANEL TYPE (Newer display panels set at 2)

Select the Panel Type according to the table which is part of a quick setup guide that keeps on changing as new displays become available.

114 - PANEL MIN VOL

115 - PANEL MAX VOL

Both items above sets the min/max volume of the display panel when using other panel aux inputs aside from the one that the STB uses. It is similar to the Min/Max Volume for the STB (items 8 & 9). Item 8 & 9 limits the volume coming out of the STB while items 114 & 115 limits the Panel Volume.

116 - VIDEO MUTE EN (Video Mute Enable) Set to 0 for normal.

Set to 1 for blank.

117 - FACT DEFAULT (Factory Default) Set to 0 for normal.

Set to 1 to load default settings for all installer menu items. WARNING: Setting this to 1 will reload the factory defaults and clear the channel list including erasing any assigned Channel Icons and Labels.

P A G E 5 8