Installer Menu (Continued)
(Continued from previous page)
047 - AUX STATUS
Set to 1 for M.P.I. AUX source to be reported as a channel number instead of channel 0. Set to 0 to disable AUX identification change. Controls M.P.I. status channel response for AUX inputs.
053 - DIS. CH-TIME (Disable Channel-Time)
Set to 1 to disable the
Set to 0 to enable the
069 - EN. CH-T COL. (Enable Text OSD Color)
Set to 1 to enable custom color for the
070 - FOR.
Set according to Color Chart. |
|
| |||
0 | = Black | 3 | = Cyan | 6 | = Yellow |
1 | = Blue | 4 | = Red | 7 | = White |
2 | = Green | 5 | = Violet |
|
|
*Note: If foreground and background color are the same, menu background is transparent.
071 - BCK.
Set according to Color Chart. |
|
| |||
0 | = Black | 3 | = Cyan | 6 | = Yellow |
1 | = Blue | 4 | = Red | 7 | = White |
2 | = Green | 5 | = Violet |
|
|
*Note: If foreground and background color are the same, menu background is transparent.
073 - CH NOT AVBLE (Channel Not Available)
If set to 1 and item 028 CHANNEL OVERRIDE is set to 0, “NOT AVAILABLE” message is displayed when directly accessing a channel not in the channel scan list available in memory.
075 - REVERT CH (Revert to Start Channel)
If set to 1 and loss of M.P.I. communication occurs, TV automatically tunes to the specified Start Channel.
078 - UPN MSB (UPN Most Significant Byte)
User programmable number, most significant byte readable by M.P.I. command. Note: Not linked to serial number.
079 - UPN MSB-1 (UPN Most Significant Byte-1)
User programmable number, most significant
080 - UPN MSB-2 (UPN Most Significant Byte-2)
User programmable number, most significant
081 - UPN LSB (UPN Least Significant Byte)
User programmable number, least significant byte readable by M.P.I. command. Not linked to serial number.
082 - CHKSM ERROR (Checksum Error) Enforces rigid M.P.I. checksum validation. Set to 1 for validation.
Set to 0 to disable (does not check checksum on M.P.I. async port). SPI is always checked.
083 - HANDSHK TIME (Handshake Time)
Adds an additional delay to the handshake time which is 64 msec, thus relaxing M.P.I. timing requirements to be compatible with PC based Windows controlled systems, range is 0 - 5.
(Timeout = 25.5MS + [25.5 MS* Handshake time]).
084 - PERMANENT BLK (Permanent Block)
Allows Lock (Parental Control) blocking schemes to be permanent by disabling the blocking hours function.
Set to 1 to install Parental Control restrictions permanently. Set to 0 for
087 - REAR RGB EN. (Rear RGB1 Enable)
Controls access to rear RGB1 input on display panel. Set to 1 to enable RGB1 input for DTV. Set to 2 for PC. Set to 0 to disable RGB1 input.
088 - EN NOISE MUTE (Enable Noise Mute)
If set to 1, audio mutes if no signal is present.
091 - YPrPb2 EN. (Rear Component Video 2 Enable) Set to 1 to enable display panel Component 2 input. Set to 0 to disable display panel Component 2 input.
092 - RGB2 ENABLE
093 - RJP AVAILABLE
Set to 1, remote jack pack is available.
Set to 0, remote jack pack is not available.
*Note: This item can not be set to 1 if item 040 AUTO CAMPORT is set to 1.
(Continued on next page)