AMX AXB-TCR manual Installation and Wiring

Page 17

Installation and Wiring

There is a danger of explosion if you replace the battery incorrectly. Replace the battery with the same or equivalent type, recommended by the manufacturer. Dispose of the used battery according to the manufacturer's instructions. Never recharge, disassemble, or heat the battery above 212 °F (100 °C). Never solder directly to the battery or expose the contents of the battery to water.

AXB-TC and AXB-TCR Television Controllers (& Receivers)	13

Image 17

Contents AXB-TC and AXB-TCR AMX Limited Warranty and Disclaimer Table of Contents AXB-TC and AXB-TCR Television Controllers & Receivers Overview AXB-TC and AXB-TCR Television ControllersAXB-TC/TCR Specifications SpecificationsAXB-TC AXB-TCR ApplicationsAXB-TC and AXB-TCR Television Controllers DIP Switch Settings Setting the Device DIP SwitchInternal Jumper Settings J3 Jumper Settings IR Attenuation Mode Bypass or Adjustment J3 jumper settings IR attenuation mode bypass or adjustmentWiring guidelines WiringPreparing/connecting captive wires TV Sensor connectionsIR Emitter connections Axlink data and power connectionsAxlink data and 12 VDC power supply connections PCS and 12 VDC power supply connections PCS and Axlink data and power connectionsSE-TC mounting dimensions InstallationIR Signal Attenuation Adjustment Television Power Sensor AdjustmentLithium battery and socket Replacing the Lithium BatteryInstallation and Wiring Installation and Wiring Channel Setting Commands Channel Setting CommandsIR Functions Standard Order IR Functions Standard OrderSendCommands SendCommands?CTON ?PTOF XCH Channel Using Softrom Firmware UpgradesUsing NetLinx Studio Upon completion of the upgrade, press F10 to exit SoftromProgramming Information It’s Your World Take Control