AMX manual AXB-TC and AXB-TCR Television Controllers, Overview

Page 5

AXB-TC and AXB-TCR Television Controllers

AXB-TC and AXB-TCR Television Controllers

Overview

The AXB-TC and AXB-TCR Television Controllers are intelligent, microprocessor-controlled systems equipped with a lithium battery to protect stored memory. The television controllers can control a variety of Infrared-controlled devices such as televisions, audio receivers, and videocassette recorders.

FIG. 1 shows the front and rear panels of the AXB-TCR. With the exception of the IR Input Window (on the AXB-TCR only), the TC and TCR share the same front and rear panel components.

IR Input Window

				IR OUT
AXlink LED				IR Out LED
AXlink LED				TV Sensor LED
	AXlink	DEVICE	ON	TV Sensor LED
	AXlink			TV SENSOR
Device DIP switch


			Front
TV Power Sensing POT

	PWR
	Rear
TV Sensor connector	PWR connector
TV Sensor connector
IR Emitter connector	AXlink connector
IR Emitter connector
FIG. 1 AXB-TCR front and rear panel components

AXB-TC and AXB-TCR Television Controllers (& Receivers)	1

Image 5

Contents AXB-TC and AXB-TCR AMX Limited Warranty and Disclaimer Table of Contents AXB-TC and AXB-TCR Television Controllers & Receivers Overview AXB-TC and AXB-TCR Television ControllersAXB-TC/TCR Specifications SpecificationsAXB-TC AXB-TCR ApplicationsAXB-TC and AXB-TCR Television Controllers DIP Switch Settings Setting the Device DIP SwitchInternal Jumper Settings J3 Jumper Settings IR Attenuation Mode Bypass or Adjustment J3 jumper settings IR attenuation mode bypass or adjustmentWiring guidelines WiringPreparing/connecting captive wires TV Sensor connectionsIR Emitter connections Axlink data and power connectionsAxlink data and 12 VDC power supply connections PCS and 12 VDC power supply connections PCS and Axlink data and power connectionsSE-TC mounting dimensions InstallationIR Signal Attenuation Adjustment Television Power Sensor AdjustmentLithium battery and socket Replacing the Lithium BatteryInstallation and Wiring Installation and Wiring Channel Setting Commands Channel Setting CommandsIR Functions Standard Order IR Functions Standard OrderSendCommands SendCommands?CTON ?PTOF XCH Channel Using Softrom Firmware UpgradesUsing NetLinx Studio Upon completion of the upgrade, press F10 to exit SoftromProgramming Information It’s Your World Take Control