Speco Technologies DVR-16/IP user manual Others

6.7 Others

This menu allows you to check the RS485 communication protocol and software version.

	Others
1	RS-485 ID Setup	224
2	RS- 485 Protocol
3	Software Information
4	HDD Information

5Shutdown

6Exit

6.7.1 RS-485 ID Set Up

This item can only be accessed by the installer, the RS-485 ID address of this DVR-16/IP can be modified here.

6.7.2 RS-485 Baud Rate

You can choose the baud rate form 38400, 19200, 9600, 4800 and 2400.

6.7.3 Software Information

This menu presents the software information.

Software Information

1 CPU Filename	D6SE0100
2 FPGA Filename	FPGA0505
3 Date	2002/01/23
4 Video System	NTSC
5 DSP BD HW	SK1V3302
5 DSP BD SW	SK1V3300
6 Exit

6.7.4 HDD Information

This item shows you the HDD information.

HDD Size

The item shows how large size the current HDD has for saving video files.

Free Size

It shows how much available space the current HDD leaves.

	HDD Information		7-4
1	HDD Size		40GB
2	Free Size		17GB
3	Total Rec Time		7Hr
4	Free Rec Time		----Hr
5	Begin	2003/04/22 16:39
6	End	2003/04/23 11:12
7	Exit

Total Rec Time

It shows how much time the current HDD originally can provide for saving the video files.

Free Rec Time

It shows how much time the current HDD can save video files. If the DVR is set to record in linear mode (the system will not overwrite files when the HDD is full), the available recording time will be calculated and shown on the screen automatically; or, if the DVR is set to circular mode, the OSD display on the screen will be “- - - - Hr”.

6.7.5 Shutdown

This item allows you to shutdown the DVR-16/IP.

There is the other way to shutdown the DVR-16/IP: press ESC and Down Arrow buttons simultaneously.

Shutdown

1 Shutdown: No

2 Shutdown: Yes

3 Exit

26