Speco Technologies user manual Connectors, Rear Board, Password, Channel Buttons, DVR-16/IP ID

11. Password

Each password contains 4 characters. If you want to enter DVR-16/IP menu or enter playback mode, you have to enter correct password. You need to key the password in the field then press “send” button before you enter DVR-16/IP menu or playback mode. The password shown on screen will not change but you are already able to enter DVR-16/IP main menu to change settings or to enter playback mode.

12. Channel Buttons

The number of channel buttons corresponds to the number of channels supported by the unit. Press one of these buttons to view the channel full screen.

Note:

If you want to select DVR-16/IP menu item, you don’t have to do it by directional key. You can use Channel Buttons instead. For example, if you want to select DVR-16/IP menu item 3 Monitor, you can just press Channel Button “3” on the right side.

13. DVR-16/IP ID

Users can set the DVR-16/IP ID here.

9. Connectors

Rear Board

5 6 7 8 9 10

1 234

Item	Description	Item	Description
1	External I/O	6	RS-485 Port
2	Main Monitor output (S-Video)	7	Call Monitor Output (BNC)
3	Video Looping (1~16)	8	Main Monitor Output (BNC)
4	Power Jack	9	LAN Port
5	IDE Port	10	Video Input (1~16)

37