Speco Technologies DVR-16/IP user manual Quick Installation Guide

3. Quick Installation Guide

The DVR-16/IP is equipped with a mobile rack, the HDD is hot-swappable. You can exchange the HDD when the HDD is full. The following figures illustrate how to install HDD into the removable cartridge.

Step1: Pull the active-handle outwards and unlock with the miniature key provided (Figure 1).

Step2: Pull the handle outwards till the carrier body is out of the cartridge (Figure 1).

Step3: Push the release latch to slide the top cover backwards and remove it (Figure 1).

Step4: Insert the DC power cable and IDE cable on the HDD. Make sure the HDD is set to “Master” (Figure 2).

Step5: Position the HDD into carrier body and slide the top cover back to secure. Secure the HDD using the screws provided (Figure 3).

Step6: Slide the carrier body back in the cartridge frame and lock it with the key provided. Then push the active-handle inwards (Figure 4).

<Figure 1>

<Figure 2>

<Figure 3>

<Figure 4>

6