Speco Technologies DVR-16/IP user manual Pages, Mode, Timer, Setup

MENU

Press this button to enter OSD setup menu (the LED will be lit).

ENTER / ZOOM

1.In OSD menu mode, this button is used to make the selection or save settings.

2.In full-screened mode, this button functions as a “2x2 Zoom In” button (the LED will be lit).

DIRECTION

1.These buttons function as directional control in OSD menu.

2.In Zoom mode, press these buttons to view the wanted viewing area.

3.In multi-window mode, the DVR-16/IP allows you to select one window to playback the recorded video while the DVR-16/IP is in Live mode. Press one of these buttons and a window cursor will be displayed. Using Direction buttons to move the cursor to desired window, and then press Play button to playback the recorded video. The password is needed before you playback the reocrded video.

SEQ

1.In Live mode, press this button to enter automatic sequential sequencing mode, and press it again to exit. The button LED will be lit (and also those channel LEDs currently in display).

2.The DVR-16/IP allows you to setup the sequence. In Sequence mode, press SET to enter and press MODE to exit this Sequence Setup menu. The number on the top is to remind you which sequence is being set. Other items will be described by following paragraphs.

Pages

	Sequence_1 Set Up
1	Pages	16	11	Page 8
2	Mode	0	12	Page 9
3	Timer	5	13	Page 10
4	Page 1		14	Page 11
5	Page 2		15	Page 12
6	Page 3		16	Page 13
7	Page 4		17	Page 14
8	Page 5		18	Page 15
9	Page 6		19	Page 16
10	Page 7		20	Exit

This first item allows you to decide the total number of pages for this sequence. The maximun value is 16, which means that each sequence can have up to 16 pages.

Mode

This item allows you to decide which display mode will be used in this sequence. “0“ represents “full screen” mode, …and “7” represents 16-windows mode.

Timer

This item allows you to set each page’s dwell time.

Page Setup

These items allow you to setup each page. Press Enter for page setup. Use directional buttons to change each page’s channel setting.

ESC

1.In OSD mode, press this button to return to previous menu. At the end of playback, the DVR-16/IP goes to Pause mode; press ESC to return to Record mode.

2.If you press this button and “Down Arrow” simultaneously, the DVR-16/IP will be shutdowned.

8