Speco Technologies DVR-16/IP Direction buttons, Menu/ Enter, Step Degree, Device Protocol, Sever

4. Direction buttons

4.1If the “Pan/ Tilt” (check box) is enabled (default), these buttons are used to pan/ tilt the connected dome cameras. Choose a wanted camera through “P/ T/ Z ID” before you tried to pan/ tilt it.

4.2If the “Pan/ Tilt” (check box) is disabled, these buttons can be used to select OSD menu items of speed dome camera.

5. Menu/ Enter

In normal status, press this button to enter the OSD menu of connected speed dome camera. This button is used as “Enter” button while in speed dome OSD menu mode.

6. Step Degree

Users can set the step degree of dome camera. You can choose form 1~15 degree.

7. DVR-16/IP-related buttons

Please refer to page 6 for the descriptions of these button functions. The password is required before entering the DVR-16/IP menu through Internet.

8. Device Protocol

Here allow you to set the device protocol. For a communication to be successful, each device must recognize and follow the same standard.

9. Sever

Press this button to go to the sever-related menu (Figure 1). Users can modify the sever settings in this menu.

<Figure 1>

33