MPX NO | MPX ID |
| Camera ID | Remark |
1 | E0H, 224 | 01H | – 10H, 1~16 | Channel 1~16 of MPX #1 |
2 | E1H, 225 | 11H – 20H, 17~32 |
| |
3 | E2H, 226 | 21H | – 30H, 33~48 |
|
4 | E3H, 227 | 31H | – 40H, 49~64 |
|
5 | E4H, 228 | 41H | – 50H, 65~80 |
|
6 | E5H, 229 | 51H | – 60H, 81~96 |
|
7 | E6H, 230 | 61H | – 70H, 97~112 |
|
8 | E7H, 231 | 71H | – 80H, 113~128 |
|
9 | E8H, 232 | 81H | – 90H, 129~144 |
|
10 | E9H, 233 | 91H | – A0H, 145~160 |
|
11 | EAH, 234 | A1H – B0H, 161~176 |
| |
12 | EBH, 235 | B1H – C0H, 177~192 |
| |
13 | ECH, 236 | C1H – D0H, 193~208 |
| |
14 | EDH, 237 | D0H – DFH, 209~223 | Only 15 Dome can be connect | |
15 | EEH, 238 | None | Can connect to normal camera | |
16 | EFH, 239 | None | Can connect to normal camera | |
2. Super MPX (Super Multiplexer Mode)
Purpose: use Main Monitor instead of Call Monitor, the feature of selecting particular camera to the system monitor is the same as MMX mode. Besides of this, by setting the multiplexers correctly, all of the cameras in this system can be displayed on the system monitor sequentially. Ex: set the P1 multiplexer to Full Screen Sequence mode, dwell time = 3 seconds. Set S1 to S16 multiplexer to 4x4 display mode. Then in 48 seconds, all 256 cameras will be displayed on the system monitor sequentially.
System Diagram:
44