Speco Technologies 4TL specifications Connect Devices to the DVR, Rear Panel Connections

Page 14

TL H.264 DVR User’s Manual

2.3Connect Devices to the DVR

This section lists some important notices that should be read before making any connection to the DVR.

Connecting Required Devices

Before power up the unit, cameras and a monitor should be connected to the unit for basic operation. If needed, connect a call monitor for displaying full screen video of all installed cameras in sequence.

Connecting Short-term Device

If any short-term devices shall be installed to the DVR as parts of the unit system, such as USB ThumbDrive® or any USB devices, etc, make sure those devices are connected only after the unit is powered up. The reason is because the DVR can recognize the external devices only after the power-up process is done completely.

2.4Rear Panel Connections

There are various connectors on the rear panel for the DVR installations. The following shows the detailed description of each connector.

Main Monitor (BNC/ VGA)

BNC and VGA output connectors are offered for connecting to a main monitor. The main monitor displays live image and playback recorded video in either full-screen or split-window format.

Call Monitor

The call monitor is used to display full screen video of all installed cameras in sequence. The BNC call monitor connector allows users to connect the DVR with an optional call monitor.

Video In

A group of BNC connectors is offered for video input streams from installed cameras. The number of connectors is equal to the number of channels.

13

Image 14
Contents DVR4TL/8TL/16TL TL H.264 DVR User’s Manual TL H.264 DVR User’s Manual Important Information Rack MountingGeneral System Setup Table of ContentOverview System Setup Basic Operation3.1 Dhcp 1.1 TL H.264 DVR User’s Manual Appendix B Remote Controller 103 Remote Monitoring SoftwareAppendix C Setting up a DVR behind a Router 105 Overview Select Video Format System SetupPosition the DVR Connect Devices to the DVR Rear Panel ConnectionsUSB Connector Alarm I/O & RS485LAN Connector RJ-45 Power JackLED Definition General System SetupFront Panel Introduction Function Keys Direction KeysESC SEQ SequenceEntering OSD Setup Menu Authority Setup Password ProtectionAccount Setup Load Default SettingPower Off Power Up / Shutdown the DVRPower Up the Unit RebootSet Date / Time System Date / Time SettingSet Date / Time Date / Time DisplayDaylight Saving Time Network Time Protocol Setup Time Zone Network Time Protocol SetupRecord Schedule / Quality Setting Schedule SetupDVR-16TL Preset Record ConfigurationPer Camera Configuration Record Event Video Only Viewing Modes Basic OperationView Live / Playback Video Viewing in Full ScreenView Recorded Video Digital ZoomView Live Cameras Freeze Live ImagePause Playback and Single Step Forward Capture SnapshotsKey Usage in Playback Sequence with Call Monitor SequenceSequence with Main Monitor For DVR-16TL onlySearch Recorded Video Search by TimeCalendar Search Search by Event Video Export EzBurn IntroductionExport Normal Video Dome Connection Dome ControlExport Event Video Dome Protocol Setup 3 RS485 SetupDome Controlling Keys Setting Preset Points Calling Preset Points Advanced System Configuration Username and PasswordTo input characters Key Usage in OSD setup menuKey Usage in Virtual Keyboard To move the cursor in title entryTo delete current character System SetupSystem/Version Info To exit the virtual keyboardSoftware Upgrade via Local Device System and Version InformationDate / Time LanguageDate / Time Time Zone Date / Time Display Date Display ModeTime Display Mode Date/Time OrderDaylight Saving Time Daylight Saving Time SetupNetwork Time Protocol Setup Setup DST Start / EndAutomatically Time Sync Unit NameNTP Server Manually Time SyncShow Unit Name Password ProtectionAccount Setup Load Default Setting Network SetupAuthority Setup LAN Setup LAN SelectPPPoE Account NetmaskGateway PPPoE Max Idle PPPoE PasswordConnect At Booting Network RestartEmail Address Smtp SetupTrigger Port Email via SmtpSmtp Account Smtp ServerSmtp Port Enable Ddns Ddns SetupSmtp Password Ddns Port Submit/ UpdateHost Name UPnP UPnP SetupEzDDNS UPnP NAT Traversal8 RS485 Setup Audio Output Split Mode AudioAudio Output/Key Beep Key BeepVGA Resolution Monitor SetupScreen Center Adjust Show Camera TitleAnalog Camera Select Camera SetupShow Color Bar Dome ProtocolBrightness Camera TitleCovert Contrast9 Hue Record SetupSaturation Record Format Record Mode SettingRecord Resolution Max Rec. PPSDay / Night Time Start / End Weekend ScheduleWeekend Start / End PALNormal Qlty Camera SelectNormal PPS Event Max PPSEvent Active EzRecord SetupEvent Qlty Circular Recording Audio RecordingPurge All Event Data Purge DataPurge All Data Purge Event BeforeMain / Call Monitor Schedule Sequence SetupMain / Call Monitor Dwell Event Icon Event SetupInternal Buzzer Email NoticeEmail Attachment Alert Notification Setup Event Duration Per Channel ConfigEmail Full Screen Channel SelectMotion Detect Motion Detect IndicatorDetection Config Sensitivity AlarmAlarm Out Block ThresholdAvailable Recording Time Database SetupTotal / Free Size of HDD Internal DisksActive ConfigurationLoad Factory Default ActionImport Configuration Export ConfigurationBegin Export Configuration NameCopy Destination Select Device Select Events Select ChannelFrom / To Time Digital Signature Data TypeExport Format Shutdown Power OffReboot Erase DiscRemote Monitoring Software System RequirementsInstallation of Software Change Internet SettingsTL H.264 DVR User’s Manual Install SpecoRemote Login / Logout View Live Video Software UpgradesBasic Operation Select Display Mode Operating Cameras with Dome ControlPlayback Instant Recorded Video Instant RecordingRecord Video Instantly Playback Video Playback Remote VideoIcon Name Description Playback Local *.drv FilesPlayback Controls Play / PauseTake a Snapshot Verify Digital SignatureSearch from Event List Health Status Normal and Dual StreamingSpecoRemote Troubleshooting Guide IPhone and Smart Phone Monitoring 101 Seagate Appendix a Recommended HDDsBrand Model Name Model Number Size MaxtorAppendix B Remote Controller 234 235 236 Appendix C Setting up a DVR behind a Router Following is an example of how the router should be set 107