Speco Technologies 4TL Unit Name, NTP Server, Automatically Time Sync, Manually Time Sync

TL H.264 DVR User’s Manual

NTP Server

Enter this item to setup a feasible time server. The default time server is time.nist.gov. Users can change it to any other time server if desired. IP addresses of other time servers are listed below for reference.

129.6.15.28	129.6.15.29	132.163.4.101
132.163.4.102	132.163.4.103	128.138.140.44
192.43.244.18	131.107.1.10	69.25.96.13
206.246.118.250	208.184.49.9	64.125.78.85
207.200.81.113	64.236.96.53	68.216.79.113

Automatically Time Sync

Select <ON> and the time will be synced once an hour.

NOTE: If users want the unit to automatically synchronize the local time, the <Time Zone> item MUST NOT be set to <OFF>, or the function cannot be activated.

Manually Time Sync

Select <Yes> to sync the time immediately.

5.1.4Unit Name

Users are allowed to assign a unit name, up to 11 characters, to DVR-4TL/8TL/16TL.

Follow the steps below to edit the unit name.

•Select <Unit Name> from System Setup menu and press ENTER. A virtual keyboard displays as below.

				Unit Name
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
a	b	c	d	e f g h	i j k l m
n	o	p	q	r s t u	v w x y z

0	1	2	3 4 5		6	7 8 9 . ! @
#	−	_	, “	+	=	*
		◄	►	Backspace Delete
		Cancel		OK

•Use Direction keys to move the cursor to the wanted character.

•Press ENTER to add the character to the entry field (up to 11 characters).

•When the unit name is entered, move the cursor to <OK> and press ENTER to save the settings and exit.

48