Speco Technologies 4TL Database Setup, Total / Free Size of HDD, Available Recording Time

Page 80

TL H.264 DVR User’s Manual

5.7Database Setup

The menu displays information of internal and external HDDs. In the main menu, select <Database Setup> and press ENTER. The following menu is displayed.

		Database Setup
1. Total Size		xxx GB
2.	Free Size	(Circular)
3. Avail. Rec Time		(Circular)
4.	Internal Disks

NOTE: If the detection of HDDs fails, the message “HDD fail” will be

displayed.

5.7.1Total / Free Size of HDD

Total Size shows the total storage capacity of HDDs that have been added to the database. Free Size indicates free storage space available for recording in the database, or “Circular” will be shown if the DVR is set to record in circular mode. Both of them are “read only”.

5.7.2Available Recording Time

The Avail Rec. Time indicates the available time duration for recording. If the DVR is set to record in circular mode, the item will show “Circular”. The information is “read only”.

5.7.3Internal Disks

Select <Internal Disks> to see information of the built-in HDDs. The menu is displayed as below.

	Internal Disks
Device Name	Temp.	Active	Action
#: xxxxxxx-xxxxxxx	33°C	Yes	None

<Device Name> and <Temp.> are read-only. The number in front of device name represents the SATA port that the HDD is connected to. Temperature of the HDD will be available if the HDD supports S.M.A.R.T. function. If no storage device can be found, the message “No Available Items!” will be displayed.

79

Image 80

Contents DVR4TL/8TL/16TL TL H.264 DVR User’s Manual TL H.264 DVR User’s Manual Important Information Rack MountingTable of Content Overview System SetupGeneral System Setup Basic Operation3.1 Dhcp 1.1 TL H.264 DVR User’s Manual Appendix B Remote Controller 103 Remote Monitoring SoftwareAppendix C Setting up a DVR behind a Router 105 Overview Select Video Format System SetupPosition the DVR Connect Devices to the DVR Rear Panel ConnectionsAlarm I/O & RS485 LAN Connector RJ-45USB Connector Power JackLED Definition General System SetupFront Panel Introduction Function Keys Direction KeysESC SEQ SequenceEntering OSD Setup Menu Password Protection Account SetupAuthority Setup Load Default SettingPower Up / Shutdown the DVR Power Up the UnitPower Off RebootSystem Date / Time Setting Set Date / TimeSet Date / Time Date / Time DisplayDaylight Saving Time Network Time Protocol Setup Time Zone Network Time Protocol SetupRecord Schedule / Quality Setting Schedule SetupDVR-16TL Preset Record ConfigurationPer Camera Configuration Record Event Video Only Basic Operation View Live / Playback VideoViewing Modes Viewing in Full ScreenDigital Zoom View Live CamerasView Recorded Video Freeze Live ImagePause Playback and Single Step Forward Capture SnapshotsKey Usage in Playback Sequence Sequence with Main MonitorSequence with Call Monitor For DVR-16TL onlySearch Recorded Video Search by TimeCalendar Search Search by Event Video Export EzBurn IntroductionExport Normal Video Dome Connection Dome ControlExport Event Video Dome Protocol Setup 3 RS485 SetupDome Controlling Keys Setting Preset Points Calling Preset Points Advanced System Configuration Username and PasswordKey Usage in OSD setup menu Key Usage in Virtual KeyboardTo input characters To move the cursor in title entrySystem Setup System/Version InfoTo delete current character To exit the virtual keyboardSoftware Upgrade via Local Device System and Version InformationDate / Time LanguageDate / Time Date Display Mode Time Display ModeTime Zone Date / Time Display Date/Time OrderDaylight Saving Time Setup Network Time Protocol Setup SetupDaylight Saving Time DST Start / EndUnit Name NTP ServerAutomatically Time Sync Manually Time SyncShow Unit Name Password ProtectionAccount Setup Load Default Setting Network SetupAuthority Setup LAN Setup LAN SelectPPPoE Account NetmaskGateway PPPoE Password Connect At BootingPPPoE Max Idle Network RestartSmtp Setup Trigger PortEmail Address Email via SmtpSmtp Account Smtp ServerSmtp Port Enable Ddns Ddns SetupSmtp Password Ddns Port Submit/ UpdateHost Name UPnP Setup EzDDNSUPnP UPnP NAT Traversal8 RS485 Setup Split Mode Audio Audio Output/Key BeepAudio Output Key BeepMonitor Setup Screen Center AdjustVGA Resolution Show Camera TitleCamera Setup Show Color BarAnalog Camera Select Dome ProtocolCamera Title CovertBrightness Contrast9 Hue Record SetupSaturation Record Mode Setting Record ResolutionRecord Format Max Rec. PPSDay / Night Time Start / End Weekend ScheduleWeekend Start / End PALCamera Select Normal PPSNormal Qlty Event Max PPSEvent Active EzRecord SetupEvent Qlty Circular Recording Audio RecordingPurge Data Purge All DataPurge All Event Data Purge Event BeforeMain / Call Monitor Schedule Sequence SetupMain / Call Monitor Dwell Event Setup Internal BuzzerEvent Icon Email NoticeEmail Attachment Alert Notification Setup Per Channel Config Email Full ScreenEvent Duration Channel SelectMotion Detect Motion Detect IndicatorDetection Config Alarm Alarm OutSensitivity Block ThresholdDatabase Setup Total / Free Size of HDDAvailable Recording Time Internal DisksConfiguration Load Factory DefaultActive ActionImport Configuration Export ConfigurationBegin Export Configuration NameCopy Destination Select Device Select Events Select ChannelFrom / To Time Digital Signature Data TypeExport Format Power Off RebootShutdown Erase DiscRemote Monitoring Software System RequirementsInstallation of Software Change Internet SettingsTL H.264 DVR User’s Manual Install SpecoRemote Login / Logout View Live Video Software UpgradesBasic Operation Select Display Mode Operating Cameras with Dome ControlPlayback Instant Recorded Video Instant RecordingRecord Video Instantly Playback Video Playback Remote VideoPlayback Local *.drv Files Playback ControlsIcon Name Description Play / PauseTake a Snapshot Verify Digital SignatureSearch from Event List Health Status Normal and Dual StreamingSpecoRemote Troubleshooting Guide IPhone and Smart Phone Monitoring 101 Appendix a Recommended HDDs Brand Model Name Model Number SizeSeagate MaxtorAppendix B Remote Controller 234 235 236 Appendix C Setting up a DVR behind a Router Following is an example of how the router should be set 107