Speco Technologies 4TL Record Mode Setting, Record Resolution, Record Format, Max Rec. PPS

Page 66

TL H.264 DVR User’s Manual

5.4.1Record Mode Setting

Enter this menu to setup record resolution. The relative record settings, such as preset configuration, will follow the record mode setting. The menu is displayed as the following.

 

Record Mode Setup

 

1.

Record Resolution

720*240

2.

Record Format

H264

3. Max Rec. PPS

120

4. CBR/VBR

VBR

5.4.1.1Record Resolution

Select resolution of the recorded video. If the recording is set to NTSC system, the selections are 720*480, 720*240, and 352*240. If the recording is set to PAL system, the selections are 720*576, 720*288, and 352*288.

5.4.1.2Record Format

The record format will be H.264 compression.

5.4.1.3Max Rec. PPS

This item will be automatically changed according to record resolution.

After the Record Mode settings are changed and the ESC is pressed to return to the previous menu, a warning message will be shown as below. Press ENTER to confirm the selection, or press ESC to abort.

!!Warning!!

System will reboot

Because of different record mode

ENTER: Yes

ESC: No

NOTE: It is strongly recommended to backup the programmed configuration before making any changes on Record Mode settings.

5.4.1.4CBR/VBR

This item allows users to select an encoding method for the unit.

CBR, standing for Constant Bit Rate, means a way to encode a file at a fixed rate. That also indicates a CBR file has consistent file size and quality.

65

Image 66
Contents DVR4TL/8TL/16TL TL H.264 DVR User’s Manual TL H.264 DVR User’s Manual Important Information Rack MountingGeneral System Setup Table of ContentOverview System Setup Basic Operation3.1 Dhcp 1.1 TL H.264 DVR User’s Manual Appendix B Remote Controller 103 Remote Monitoring SoftwareAppendix C Setting up a DVR behind a Router 105 Overview System Setup Position the DVRSelect Video Format Connect Devices to the DVR Rear Panel ConnectionsUSB Connector Alarm I/O & RS485LAN Connector RJ-45 Power JackGeneral System Setup Front Panel IntroductionLED Definition Function Keys Direction KeysESC SEQ SequenceEntering OSD Setup Menu Authority Setup Password ProtectionAccount Setup Load Default SettingPower Off Power Up / Shutdown the DVRPower Up the Unit RebootSet Date / Time System Date / Time SettingSet Date / Time Date / Time DisplayDaylight Saving Time Network Time Protocol Setup Time Zone Network Time Protocol SetupRecord Schedule / Quality Setting Schedule SetupPreset Record Configuration Per Camera ConfigurationDVR-16TL Record Event Video Only Viewing Modes Basic OperationView Live / Playback Video Viewing in Full ScreenView Recorded Video Digital ZoomView Live Cameras Freeze Live ImageCapture Snapshots Key Usage in PlaybackPause Playback and Single Step Forward Sequence with Call Monitor SequenceSequence with Main Monitor For DVR-16TL onlySearch Recorded Video Search by TimeCalendar Search Search by Event Video Export EzBurn IntroductionExport Normal Video Dome Control Export Event VideoDome Connection Dome Protocol Setup 3 RS485 SetupDome Controlling Keys Setting Preset Points Calling Preset Points Advanced System Configuration Username and PasswordTo input characters Key Usage in OSD setup menuKey Usage in Virtual Keyboard To move the cursor in title entryTo delete current character System SetupSystem/Version Info To exit the virtual keyboardSoftware Upgrade via Local Device System and Version InformationLanguage Date / TimeDate / Time Time Zone Date / Time Display Date Display ModeTime Display Mode Date/Time OrderDaylight Saving Time Daylight Saving Time SetupNetwork Time Protocol Setup Setup DST Start / EndAutomatically Time Sync Unit NameNTP Server Manually Time SyncPassword Protection Account SetupShow Unit Name Network Setup Authority SetupLoad Default Setting LAN Setup LAN SelectNetmask GatewayPPPoE Account PPPoE Max Idle PPPoE PasswordConnect At Booting Network RestartEmail Address Smtp SetupTrigger Port Email via SmtpSmtp Server Smtp PortSmtp Account Ddns Setup Smtp PasswordEnable Ddns Submit/ Update Host NameDdns Port UPnP UPnP SetupEzDDNS UPnP NAT Traversal8 RS485 Setup Audio Output Split Mode AudioAudio Output/Key Beep Key BeepVGA Resolution Monitor SetupScreen Center Adjust Show Camera TitleAnalog Camera Select Camera SetupShow Color Bar Dome ProtocolBrightness Camera TitleCovert ContrastRecord Setup Saturation9 Hue Record Format Record Mode SettingRecord Resolution Max Rec. PPSDay / Night Time Start / End Weekend ScheduleWeekend Start / End PALNormal Qlty Camera SelectNormal PPS Event Max PPSEzRecord Setup Event QltyEvent Active Circular Recording Audio RecordingPurge All Event Data Purge DataPurge All Data Purge Event BeforeSequence Setup Main / Call Monitor DwellMain / Call Monitor Schedule Event Icon Event SetupInternal Buzzer Email NoticeEmail Attachment Alert Notification Setup Event Duration Per Channel ConfigEmail Full Screen Channel SelectMotion Detect Indicator Detection ConfigMotion Detect Sensitivity AlarmAlarm Out Block ThresholdAvailable Recording Time Database SetupTotal / Free Size of HDD Internal DisksActive ConfigurationLoad Factory Default ActionImport Configuration Export ConfigurationConfiguration Name Copy DestinationBegin Export Select Device Select Channel From / To TimeSelect Events Data Type Export FormatDigital Signature Shutdown Power OffReboot Erase DiscRemote Monitoring Software System RequirementsInstallation of Software Change Internet SettingsTL H.264 DVR User’s Manual Install SpecoRemote Login / Logout Software Upgrades Basic OperationView Live Video Select Display Mode Operating Cameras with Dome ControlInstant Recording Record Video InstantlyPlayback Instant Recorded Video Playback Video Playback Remote VideoIcon Name Description Playback Local *.drv FilesPlayback Controls Play / PauseVerify Digital Signature Search from Event ListTake a Snapshot Health Status Normal and Dual StreamingSpecoRemote Troubleshooting Guide IPhone and Smart Phone Monitoring 101 Seagate Appendix a Recommended HDDsBrand Model Name Model Number Size MaxtorAppendix B Remote Controller 234 235 236 Appendix C Setting up a DVR behind a Router Following is an example of how the router should be set 107