Speco Technologies 4TL Power Up / Shutdown the DVR, Power Up the Unit, Power Off, Reboot

Page 21

TL H.264 DVR User’s Manual

3.3Power Up / Shutdown the DVR

If the DVR must be shutdown for any reason, please use the proper shut down and power up procedures to avoid damaging the DVR.

Power Up the Unit

Simply plug in the power adapter that came with the package and the DVR will start to boot.

The color bar and system checking information will be shown on the monitor and then disappear when the unit has been completely powered up.

Restart / Shutdown the Unit

Press MENU and input the username and password that has sufficient authority to access the OSD setup menu. Select <Shutdown> in Main Menu and press ENTER to enter the Shutdown menu, which displays as follows.

		Shutdown
1.	Power Off	Execute
2.	Reboot	Execute

<Power Off>

Select this item to shut down the unit. Do not remove the power during shut down until the message “You can safely turn off DVR now!” displays.

<Reboot>

Select this item to reboot the unit. The color bar and system checking information are displayed on the monitor until the unit is completely restarted.

20

Image 21

Contents DVR4TL/8TL/16TL TL H.264 DVR User’s Manual TL H.264 DVR User’s Manual Rack Mounting Important InformationOverview System Setup Table of ContentGeneral System Setup Basic Operation3.1 Dhcp 1.1 TL H.264 DVR User’s Manual Remote Monitoring Software Appendix B Remote Controller 103Appendix C Setting up a DVR behind a Router 105 Overview System Setup Position the DVRSelect Video Format Rear Panel Connections Connect Devices to the DVRLAN Connector RJ-45 Alarm I/O & RS485USB Connector Power JackGeneral System Setup Front Panel IntroductionLED Definition Direction Keys Function KeysSEQ Sequence ESCEntering OSD Setup Menu Account Setup Password ProtectionAuthority Setup Load Default SettingPower Up the Unit Power Up / Shutdown the DVRPower Off RebootSet Date / Time System Date / Time SettingSet Date / Time Date / Time DisplayDaylight Saving Time Time Zone Network Time Protocol Setup Network Time Protocol SetupSchedule Setup Record Schedule / Quality SettingPreset Record Configuration Per Camera ConfigurationDVR-16TL Record Event Video Only View Live / Playback Video Basic OperationViewing Modes Viewing in Full ScreenView Live Cameras Digital ZoomView Recorded Video Freeze Live ImageCapture Snapshots Key Usage in PlaybackPause Playback and Single Step Forward Sequence with Main Monitor SequenceSequence with Call Monitor For DVR-16TL onlySearch by Time Search Recorded VideoCalendar Search Search by Event EzBurn Introduction Video ExportExport Normal Video Dome Control Export Event VideoDome Connection 3 RS485 Setup Dome Protocol SetupDome Controlling Keys Setting Preset Points Calling Preset Points Username and Password Advanced System ConfigurationKey Usage in Virtual Keyboard Key Usage in OSD setup menuTo input characters To move the cursor in title entrySystem/Version Info System SetupTo delete current character To exit the virtual keyboardSystem and Version Information Software Upgrade via Local DeviceLanguage Date / TimeDate / Time Time Display Mode Date Display ModeTime Zone Date / Time Display Date/Time OrderNetwork Time Protocol Setup Setup Daylight Saving Time SetupDaylight Saving Time DST Start / EndNTP Server Unit NameAutomatically Time Sync Manually Time SyncPassword Protection Account SetupShow Unit Name Network Setup Authority SetupLoad Default Setting LAN Select LAN SetupNetmask GatewayPPPoE Account Connect At Booting PPPoE PasswordPPPoE Max Idle Network RestartTrigger Port Smtp SetupEmail Address Email via SmtpSmtp Server Smtp PortSmtp Account Ddns Setup Smtp PasswordEnable Ddns Submit/ Update Host NameDdns Port EzDDNS UPnP SetupUPnP UPnP NAT Traversal8 RS485 Setup Audio Output/Key Beep Split Mode AudioAudio Output Key BeepScreen Center Adjust Monitor SetupVGA Resolution Show Camera TitleShow Color Bar Camera SetupAnalog Camera Select Dome ProtocolCovert Camera TitleBrightness ContrastRecord Setup Saturation9 Hue Record Resolution Record Mode SettingRecord Format Max Rec. PPSWeekend Schedule Day / Night Time Start / EndPAL Weekend Start / EndNormal PPS Camera SelectNormal Qlty Event Max PPSEzRecord Setup Event QltyEvent Active Audio Recording Circular RecordingPurge All Data Purge DataPurge All Event Data Purge Event BeforeSequence Setup Main / Call Monitor DwellMain / Call Monitor Schedule Internal Buzzer Event SetupEvent Icon Email NoticeEmail Attachment Alert Notification Setup Email Full Screen Per Channel ConfigEvent Duration Channel SelectMotion Detect Indicator Detection ConfigMotion Detect Alarm Out AlarmSensitivity Block ThresholdTotal / Free Size of HDD Database SetupAvailable Recording Time Internal DisksLoad Factory Default ConfigurationActive ActionExport Configuration Import ConfigurationConfiguration Name Copy DestinationBegin Export Select Device Select Channel From / To TimeSelect Events Data Type Export FormatDigital Signature Reboot Power OffShutdown Erase DiscSystem Requirements Remote Monitoring SoftwareChange Internet Settings Installation of SoftwareTL H.264 DVR User’s Manual Install SpecoRemote Login / Logout Software Upgrades Basic OperationView Live Video Operating Cameras with Dome Control Select Display ModeInstant Recording Record Video InstantlyPlayback Instant Recorded Video Playback Remote Video Playback VideoPlayback Controls Playback Local *.drv FilesIcon Name Description Play / PauseVerify Digital Signature Search from Event ListTake a Snapshot Normal and Dual Streaming Health StatusSpecoRemote Troubleshooting Guide IPhone and Smart Phone Monitoring 101 Brand Model Name Model Number Size Appendix a Recommended HDDsSeagate MaxtorAppendix B Remote Controller 234 235 236 Appendix C Setting up a DVR behind a Router Following is an example of how the router should be set 107