Speco Technologies 4TL Monitor Setup, Show Camera Title, Screen Center Adjust, VGA Resolution

Page 62

TL H.264 DVR User’s Manual

5.2Monitor Setup

The Monitor Setup menu allows users to adjust the quality of the displayed image. Select <Monitor Setup> from the Main menu and press ENTER. The following menu is displayed.

	Monitor Setup
1.	Show Camera Title	Yes
2.	Screen Center Adjust
3.	VGA Resolution	800x600
4.	Show Color Bar	Execute

5.2.1Show Camera Title

This item allows users to choose whether to display the camera title on the screen or not. The default is <Yes>, which displays the camera titles with the video.

5.2.2Screen Center Adjust

This item is used to adjust the screen center of the main monitor display area. Follow the steps to set the center point.

•Select <Screen Center Adjust> from the Monitor Setup menu and press ENTER. The adjusting screen is as follows.

Screen Center Adjust

▲

◄

+

►

▼

•Position the screen center position using the Direction keys.

•Press ENTER to exit when finished.

5.2.3VGA Resolution

This item allows users to select appropriate VGA resolution for the VGA monitor connected to the DVR. The options are <800×600> (default), <1024×768> and <1280×1024>.

NOTE: If the selected VGA resolution is too high that the monitor cannot support, the message “No Signal’’ will be displayed. Then please press ESC on the front panel to restore the original setting.

61

Image 62

Contents DVR4TL/8TL/16TL TL H.264 DVR User’s Manual TL H.264 DVR User’s Manual Important Information Rack MountingGeneral System Setup Table of ContentOverview System Setup Basic Operation3.1 Dhcp 1.1 TL H.264 DVR User’s Manual Appendix B Remote Controller 103 Remote Monitoring SoftwareAppendix C Setting up a DVR behind a Router 105 Overview Select Video Format System SetupPosition the DVR Connect Devices to the DVR Rear Panel ConnectionsUSB Connector Alarm I/O & RS485LAN Connector RJ-45 Power JackLED Definition General System SetupFront Panel Introduction Function Keys Direction KeysESC SEQ SequenceEntering OSD Setup Menu Authority Setup Password ProtectionAccount Setup Load Default SettingPower Off Power Up / Shutdown the DVRPower Up the Unit RebootSet Date / Time System Date / Time SettingSet Date / Time Date / Time DisplayDaylight Saving Time Network Time Protocol Setup Time Zone Network Time Protocol SetupRecord Schedule / Quality Setting Schedule SetupDVR-16TL Preset Record ConfigurationPer Camera Configuration Record Event Video Only Viewing Modes Basic OperationView Live / Playback Video Viewing in Full ScreenView Recorded Video Digital ZoomView Live Cameras Freeze Live ImagePause Playback and Single Step Forward Capture SnapshotsKey Usage in Playback Sequence with Call Monitor SequenceSequence with Main Monitor For DVR-16TL onlySearch Recorded Video Search by TimeCalendar Search Search by Event Video Export EzBurn IntroductionExport Normal Video Dome Connection Dome ControlExport Event Video Dome Protocol Setup 3 RS485 SetupDome Controlling Keys Setting Preset Points Calling Preset Points Advanced System Configuration Username and PasswordTo input characters Key Usage in OSD setup menuKey Usage in Virtual Keyboard To move the cursor in title entryTo delete current character System SetupSystem/Version Info To exit the virtual keyboardSoftware Upgrade via Local Device System and Version InformationDate / Time LanguageDate / Time Time Zone Date / Time Display Date Display ModeTime Display Mode Date/Time OrderDaylight Saving Time Daylight Saving Time SetupNetwork Time Protocol Setup Setup DST Start / EndAutomatically Time Sync Unit NameNTP Server Manually Time SyncShow Unit Name Password ProtectionAccount Setup Load Default Setting Network SetupAuthority Setup LAN Setup LAN SelectPPPoE Account NetmaskGateway PPPoE Max Idle PPPoE PasswordConnect At Booting Network RestartEmail Address Smtp SetupTrigger Port Email via SmtpSmtp Account Smtp ServerSmtp Port Enable Ddns Ddns SetupSmtp Password Ddns Port Submit/ UpdateHost Name UPnP UPnP SetupEzDDNS UPnP NAT Traversal8 RS485 Setup Audio Output Split Mode AudioAudio Output/Key Beep Key BeepVGA Resolution Monitor SetupScreen Center Adjust Show Camera TitleAnalog Camera Select Camera SetupShow Color Bar Dome ProtocolBrightness Camera TitleCovert Contrast9 Hue Record SetupSaturation Record Format Record Mode SettingRecord Resolution Max Rec. PPSDay / Night Time Start / End Weekend ScheduleWeekend Start / End PALNormal Qlty Camera SelectNormal PPS Event Max PPSEvent Active EzRecord SetupEvent Qlty Circular Recording Audio RecordingPurge All Event Data Purge DataPurge All Data Purge Event BeforeMain / Call Monitor Schedule Sequence SetupMain / Call Monitor Dwell Event Icon Event SetupInternal Buzzer Email NoticeEmail Attachment Alert Notification Setup Event Duration Per Channel ConfigEmail Full Screen Channel SelectMotion Detect Motion Detect IndicatorDetection Config Sensitivity AlarmAlarm Out Block ThresholdAvailable Recording Time Database SetupTotal / Free Size of HDD Internal DisksActive ConfigurationLoad Factory Default ActionImport Configuration Export ConfigurationBegin Export Configuration NameCopy Destination Select Device Select Events Select ChannelFrom / To Time Digital Signature Data TypeExport Format Shutdown Power OffReboot Erase DiscRemote Monitoring Software System RequirementsInstallation of Software Change Internet SettingsTL H.264 DVR User’s Manual Install SpecoRemote Login / Logout View Live Video Software UpgradesBasic Operation Select Display Mode Operating Cameras with Dome ControlPlayback Instant Recorded Video Instant RecordingRecord Video Instantly Playback Video Playback Remote VideoIcon Name Description Playback Local *.drv FilesPlayback Controls Play / PauseTake a Snapshot Verify Digital SignatureSearch from Event List Health Status Normal and Dual StreamingSpecoRemote Troubleshooting Guide IPhone and Smart Phone Monitoring 101 Seagate Appendix a Recommended HDDsBrand Model Name Model Number Size MaxtorAppendix B Remote Controller 234 235 236 Appendix C Setting up a DVR behind a Router Following is an example of how the router should be set 107