Speco Technologies 4TL specifications Audio Output/Key Beep, Split Mode Audio

Page 61

TL H.264 DVR User’s Manual

5.1.9Audio Output/Key Beep

Enter this menu to setup the audio output or key beep.

Audio Output/Key Beep
1. Audio Output	Live/PB
2. Key Beep	ON
3. Split Mode Audio	OFF

5.1.9.1Audio Output

This item is used to set the audio output mode. The available options are as below.

<Live/PB>

Select this to play the recording sounds of live image in live mode, and sounds of recorded video in playback mode respectively.

<Always Live>

Select this to play live sounds in both live mode and playback mode.

<OFF>

Select this to disable the audio output function.

5.1.9.2Key Beep

This item is used to enable or disable the key tone. Select <ON> to enable the key tone, or <OFF> to disable.

5.1.9.3Split Mode Audio

This item allows users to select and output the audio of the selected channel while viewing multiple channels. Select <CH1> through <CH16> to output the preferred audio, or select <OFF> to disable audio output in multiple window viewing modes.

60

Image 61

Contents DVR4TL/8TL/16TL TL H.264 DVR User’s Manual TL H.264 DVR User’s Manual Rack Mounting Important InformationOverview System Setup Table of ContentGeneral System Setup Basic Operation3.1 Dhcp 1.1 TL H.264 DVR User’s Manual Remote Monitoring Software Appendix B Remote Controller 103Appendix C Setting up a DVR behind a Router 105 Overview Position the DVR System SetupSelect Video Format Rear Panel Connections Connect Devices to the DVRLAN Connector RJ-45 Alarm I/O & RS485USB Connector Power JackFront Panel Introduction General System SetupLED Definition Direction Keys Function KeysSEQ Sequence ESCEntering OSD Setup Menu Account Setup Password ProtectionAuthority Setup Load Default SettingPower Up the Unit Power Up / Shutdown the DVRPower Off RebootSet Date / Time System Date / Time SettingSet Date / Time Date / Time DisplayDaylight Saving Time Time Zone Network Time Protocol Setup Network Time Protocol SetupSchedule Setup Record Schedule / Quality SettingPer Camera Configuration Preset Record ConfigurationDVR-16TL Record Event Video Only View Live / Playback Video Basic OperationViewing Modes Viewing in Full ScreenView Live Cameras Digital ZoomView Recorded Video Freeze Live ImageKey Usage in Playback Capture SnapshotsPause Playback and Single Step Forward Sequence with Main Monitor SequenceSequence with Call Monitor For DVR-16TL onlySearch by Time Search Recorded VideoCalendar Search Search by Event EzBurn Introduction Video ExportExport Normal Video Export Event Video Dome ControlDome Connection 3 RS485 Setup Dome Protocol SetupDome Controlling Keys Setting Preset Points Calling Preset Points Username and Password Advanced System ConfigurationKey Usage in Virtual Keyboard Key Usage in OSD setup menuTo input characters To move the cursor in title entrySystem/Version Info System SetupTo delete current character To exit the virtual keyboardSystem and Version Information Software Upgrade via Local DeviceDate / Time LanguageDate / Time Time Display Mode Date Display ModeTime Zone Date / Time Display Date/Time OrderNetwork Time Protocol Setup Setup Daylight Saving Time SetupDaylight Saving Time DST Start / EndNTP Server Unit NameAutomatically Time Sync Manually Time SyncAccount Setup Password ProtectionShow Unit Name Authority Setup Network SetupLoad Default Setting LAN Select LAN SetupGateway NetmaskPPPoE Account Connect At Booting PPPoE PasswordPPPoE Max Idle Network RestartTrigger Port Smtp SetupEmail Address Email via SmtpSmtp Port Smtp ServerSmtp Account Smtp Password Ddns SetupEnable Ddns Host Name Submit/ UpdateDdns Port EzDDNS UPnP SetupUPnP UPnP NAT Traversal8 RS485 Setup Audio Output/Key Beep Split Mode AudioAudio Output Key BeepScreen Center Adjust Monitor SetupVGA Resolution Show Camera TitleShow Color Bar Camera SetupAnalog Camera Select Dome ProtocolCovert Camera TitleBrightness ContrastSaturation Record Setup9 Hue Record Resolution Record Mode SettingRecord Format Max Rec. PPSWeekend Schedule Day / Night Time Start / EndPAL Weekend Start / EndNormal PPS Camera SelectNormal Qlty Event Max PPSEvent Qlty EzRecord SetupEvent Active Audio Recording Circular RecordingPurge All Data Purge DataPurge All Event Data Purge Event BeforeMain / Call Monitor Dwell Sequence SetupMain / Call Monitor Schedule Internal Buzzer Event SetupEvent Icon Email NoticeEmail Attachment Alert Notification Setup Email Full Screen Per Channel ConfigEvent Duration Channel SelectDetection Config Motion Detect IndicatorMotion Detect Alarm Out AlarmSensitivity Block ThresholdTotal / Free Size of HDD Database SetupAvailable Recording Time Internal DisksLoad Factory Default ConfigurationActive ActionExport Configuration Import ConfigurationCopy Destination Configuration NameBegin Export Select Device From / To Time Select ChannelSelect Events Export Format Data TypeDigital Signature Reboot Power OffShutdown Erase DiscSystem Requirements Remote Monitoring SoftwareChange Internet Settings Installation of SoftwareTL H.264 DVR User’s Manual Install SpecoRemote Login / Logout Basic Operation Software UpgradesView Live Video Operating Cameras with Dome Control Select Display ModeRecord Video Instantly Instant RecordingPlayback Instant Recorded Video Playback Remote Video Playback VideoPlayback Controls Playback Local *.drv FilesIcon Name Description Play / PauseSearch from Event List Verify Digital SignatureTake a Snapshot Normal and Dual Streaming Health StatusSpecoRemote Troubleshooting Guide IPhone and Smart Phone Monitoring 101 Brand Model Name Model Number Size Appendix a Recommended HDDsSeagate MaxtorAppendix B Remote Controller 234 235 236 Appendix C Setting up a DVR behind a Router Following is an example of how the router should be set 107