Speco Technologies 4TL specifications Trigger Port, Email Address, Smtp Setup, Email via Smtp

TL H.264 DVR User’s Manual

5.1.7.3Trigger Port

To avoid the possibility of the default service port (port 100) being blocked, this item enables the user to change port 100 into another port. To change the trigger port, move the cursor over <Trigger Port> and press ENTER, then adjust the setting by UP / DOWN keys.

5.1.7.4Email Address

This item is used to edit the e-mail address where alarm event information will be sent. Follow these steps to setup the e-mail address.

•Select <Email Address> from Network Setup menu and press ENTER. A virtual keyboard displays.

•Use Direction keys to move the cursor for selecting from characters.

•Press ENTER to add the selected character to the entry field.

•When it’s done, move the cursor to <OK> and press ENTER to save the settings and exit.

5.1.7.5SMTP Setup

Simple Mail Transfer Protocol (SMTP), a protocol for sending e-mail messages between servers. SMTP is a relatively simple, text-based protocol that one or more recipients of a message are specified and the message text is transferred.

Select < SMTP Setup> from Network Setup menu and press ENTER; the menu displays as follows.

		SMTP Setup
1.	Email via SMTP	ON
2.	SMTP Server
3.	SMTP Port	25
4.	SMTP Account

5. SMTP Password

Email via SMTP

The item enables users to determine if the DVR sends e-mail via SMTP. Select <ON> to send e-mail via SMTP using direction keys; if not, select <OFF>.

54