Speco Technologies 4TL specifications Shutdown, Erase Disc, Begin Export, Power Off, Reboot

Page 87

TL H.264 DVR User’s Manual

5.9.8Erase Disc

This function is used to remove information found on a DVD+RW disk prior to exporting new information to the drive. Select <Yes> and press ENTER to start deleting data.

NOTE: This item will be grayed out when the selected device is not a DVD recorder or when the device is not selected yet.

5.9.9Begin Export

Select <Yes> and press ENTER to start exporting.

5.10Shutdown

This item is used to shut down or reboot the unit. If users must shut down DVR-4TL/8TL/16TLfor any reason, please follow the proper shut down and power on procedures to avoid any potential damages to the unit.

Select <Shutdown> in Main menu and press ENTER to access the Shutdown menu, which displays as follows.

		Shutdown
1.	Power Off	Execute
2.	Reboot	Execute

5.10.1Power Off

Press ENTER on this item to shut down the unit. Do not remove the power during shut down until the message “You can safely turn off DVR now!” displays.

5.10.2Reboot

Press ENTER on this item to reboot the unit. The color bar and system checking information are displayed on the monitor until the unit is completely restarted.

86

Image 87

Contents DVR4TL/8TL/16TL TL H.264 DVR User’s Manual TL H.264 DVR User’s Manual Rack Mounting Important InformationBasic Operation Table of ContentOverview System Setup General System Setup3.1 Dhcp 1.1 TL H.264 DVR User’s Manual Remote Monitoring Software Appendix B Remote Controller 103Appendix C Setting up a DVR behind a Router 105 Overview System Setup Position the DVRSelect Video Format Rear Panel Connections Connect Devices to the DVRPower Jack Alarm I/O & RS485LAN Connector RJ-45 USB ConnectorGeneral System Setup Front Panel IntroductionLED Definition Direction Keys Function KeysSEQ Sequence ESCEntering OSD Setup Menu Load Default Setting Password ProtectionAccount Setup Authority SetupReboot Power Up / Shutdown the DVRPower Up the Unit Power OffDate / Time Display System Date / Time SettingSet Date / Time Set Date / TimeDaylight Saving Time Time Zone Network Time Protocol Setup Network Time Protocol SetupSchedule Setup Record Schedule / Quality SettingPreset Record Configuration Per Camera ConfigurationDVR-16TL Record Event Video Only Viewing in Full Screen Basic OperationView Live / Playback Video Viewing ModesFreeze Live Image Digital ZoomView Live Cameras View Recorded VideoCapture Snapshots Key Usage in PlaybackPause Playback and Single Step Forward For DVR-16TL only SequenceSequence with Main Monitor Sequence with Call MonitorSearch by Time Search Recorded VideoCalendar Search Search by Event EzBurn Introduction Video ExportExport Normal Video Dome Control Export Event VideoDome Connection 3 RS485 Setup Dome Protocol SetupDome Controlling Keys Setting Preset Points Calling Preset Points Username and Password Advanced System ConfigurationTo move the cursor in title entry Key Usage in OSD setup menuKey Usage in Virtual Keyboard To input charactersTo exit the virtual keyboard System SetupSystem/Version Info To delete current characterSystem and Version Information Software Upgrade via Local DeviceLanguage Date / TimeDate / Time Date/Time Order Date Display ModeTime Display Mode Time Zone Date / Time DisplayDST Start / End Daylight Saving Time SetupNetwork Time Protocol Setup Setup Daylight Saving TimeManually Time Sync Unit NameNTP Server Automatically Time SyncPassword Protection Account SetupShow Unit Name Network Setup Authority SetupLoad Default Setting LAN Select LAN SetupNetmask GatewayPPPoE Account Network Restart PPPoE PasswordConnect At Booting PPPoE Max IdleEmail via Smtp Smtp SetupTrigger Port Email AddressSmtp Server Smtp PortSmtp Account Ddns Setup Smtp PasswordEnable Ddns Submit/ Update Host NameDdns Port UPnP NAT Traversal UPnP SetupEzDDNS UPnP8 RS485 Setup Key Beep Split Mode AudioAudio Output/Key Beep Audio OutputShow Camera Title Monitor SetupScreen Center Adjust VGA ResolutionDome Protocol Camera SetupShow Color Bar Analog Camera SelectContrast Camera TitleCovert BrightnessRecord Setup Saturation9 Hue Max Rec. PPS Record Mode SettingRecord Resolution Record FormatWeekend Schedule Day / Night Time Start / EndPAL Weekend Start / EndEvent Max PPS Camera SelectNormal PPS Normal QltyEzRecord Setup Event QltyEvent Active Audio Recording Circular RecordingPurge Event Before Purge DataPurge All Data Purge All Event DataSequence Setup Main / Call Monitor DwellMain / Call Monitor Schedule Email Notice Event SetupInternal Buzzer Event IconEmail Attachment Alert Notification Setup Channel Select Per Channel ConfigEmail Full Screen Event DurationMotion Detect Indicator Detection ConfigMotion Detect Block Threshold AlarmAlarm Out SensitivityInternal Disks Database SetupTotal / Free Size of HDD Available Recording TimeAction ConfigurationLoad Factory Default ActiveExport Configuration Import ConfigurationConfiguration Name Copy DestinationBegin Export Select Device Select Channel From / To TimeSelect Events Data Type Export FormatDigital Signature Erase Disc Power OffReboot ShutdownSystem Requirements Remote Monitoring SoftwareChange Internet Settings Installation of SoftwareTL H.264 DVR User’s Manual Install SpecoRemote Login / Logout Software Upgrades Basic OperationView Live Video Operating Cameras with Dome Control Select Display ModeInstant Recording Record Video InstantlyPlayback Instant Recorded Video Playback Remote Video Playback VideoPlay / Pause Playback Local *.drv FilesPlayback Controls Icon Name DescriptionVerify Digital Signature Search from Event ListTake a Snapshot Normal and Dual Streaming Health StatusSpecoRemote Troubleshooting Guide IPhone and Smart Phone Monitoring 101 Maxtor Appendix a Recommended HDDsBrand Model Name Model Number Size SeagateAppendix B Remote Controller 234 235 236 Appendix C Setting up a DVR behind a Router Following is an example of how the router should be set 107