Speco Technologies 4TL Sequence Setup, Main / Call Monitor Dwell, Main / Call Monitor Schedule

Page 73

TL H.264 DVR User’s Manual

5.5Sequence Setup

The Sequence Setup menu allows the user to set the camera sequence schedule and dwell time for main and call monitor. Select <Sequence Setup> in Main menu and press ENTER; the menu displays as follows.

 

Sequence Setup

 

1.

Main Monitor Dwell

5 Sec

2.

Main Monitor Schedule

 

3.

Call Monitor Dwell

5 Sec

4.

Call Monitor Schedule

 

5.5.1Main / Call Monitor Dwell

The main/ call monitor can be set to display full screen video of all installed cameras in sequence. This item is used to set the Main/ Call Monitor dwell time, which is the duration of time elapsed before switching to the next channel. The dwell time is in the range of 1 to 120 seconds.

5.5.2Main / Call Monitor Schedule

This item is used to set displaying sequence of connected cameras to be displayed on the main/ call monitor in full-screen format. Move the cursor to <Main Monitor Schedule> and press ENTER. The menu is shown as below.

Main Monitor Schedule

_►_►_►_►_►_►_►_► _►_►_►_►_►_►_►_

Press Channel Keys To Select Channel

Press ◄ Key To Delete

Follow these steps to set a sequence:

Press LEFT direction key to delete the original setting.

Press the desired Channel keys to assign the camera to the position where the cursor stops.

Continue the steps until the sequence is completed.

The maximum number of entries in a sequence equals to the number of channels. Users can select fewer than the maximum entries for camera sequence and leave the remaining entries blank. The sequence can include a specific camera or cameras multiple times.

72

Image 73
Contents DVR4TL/8TL/16TL TL H.264 DVR User’s Manual TL H.264 DVR User’s Manual Rack Mounting Important InformationOverview System Setup Table of ContentGeneral System Setup Basic Operation3.1 Dhcp 1.1 TL H.264 DVR User’s Manual Remote Monitoring Software Appendix B Remote Controller 103Appendix C Setting up a DVR behind a Router 105 Overview Position the DVR System SetupSelect Video Format Rear Panel Connections Connect Devices to the DVRLAN Connector RJ-45 Alarm I/O & RS485USB Connector Power JackFront Panel Introduction General System SetupLED Definition Direction Keys Function KeysSEQ Sequence ESCEntering OSD Setup Menu Account Setup Password ProtectionAuthority Setup Load Default SettingPower Up the Unit Power Up / Shutdown the DVRPower Off RebootSet Date / Time System Date / Time SettingSet Date / Time Date / Time DisplayDaylight Saving Time Time Zone Network Time Protocol Setup Network Time Protocol SetupSchedule Setup Record Schedule / Quality SettingPer Camera Configuration Preset Record ConfigurationDVR-16TL Record Event Video Only View Live / Playback Video Basic OperationViewing Modes Viewing in Full ScreenView Live Cameras Digital ZoomView Recorded Video Freeze Live ImageKey Usage in Playback Capture SnapshotsPause Playback and Single Step Forward Sequence with Main Monitor SequenceSequence with Call Monitor For DVR-16TL onlySearch by Time Search Recorded VideoCalendar Search Search by Event EzBurn Introduction Video ExportExport Normal Video Export Event Video Dome ControlDome Connection 3 RS485 Setup Dome Protocol SetupDome Controlling Keys Setting Preset Points Calling Preset Points Username and Password Advanced System ConfigurationKey Usage in Virtual Keyboard Key Usage in OSD setup menuTo input characters To move the cursor in title entrySystem/Version Info System SetupTo delete current character To exit the virtual keyboardSystem and Version Information Software Upgrade via Local DeviceDate / Time LanguageDate / Time Time Display Mode Date Display ModeTime Zone Date / Time Display Date/Time OrderNetwork Time Protocol Setup Setup Daylight Saving Time SetupDaylight Saving Time DST Start / EndNTP Server Unit NameAutomatically Time Sync Manually Time SyncAccount Setup Password ProtectionShow Unit Name Authority Setup Network SetupLoad Default Setting LAN Select LAN SetupGateway NetmaskPPPoE Account Connect At Booting PPPoE PasswordPPPoE Max Idle Network RestartTrigger Port Smtp SetupEmail Address Email via SmtpSmtp Port Smtp ServerSmtp Account Smtp Password Ddns SetupEnable Ddns Host Name Submit/ UpdateDdns Port EzDDNS UPnP SetupUPnP UPnP NAT Traversal8 RS485 Setup Audio Output/Key Beep Split Mode AudioAudio Output Key BeepScreen Center Adjust Monitor SetupVGA Resolution Show Camera TitleShow Color Bar Camera SetupAnalog Camera Select Dome ProtocolCovert Camera TitleBrightness ContrastSaturation Record Setup9 Hue Record Resolution Record Mode SettingRecord Format Max Rec. PPSWeekend Schedule Day / Night Time Start / EndPAL Weekend Start / EndNormal PPS Camera SelectNormal Qlty Event Max PPSEvent Qlty EzRecord SetupEvent Active Audio Recording Circular RecordingPurge All Data Purge DataPurge All Event Data Purge Event BeforeMain / Call Monitor Dwell Sequence SetupMain / Call Monitor Schedule Internal Buzzer Event SetupEvent Icon Email NoticeEmail Attachment Alert Notification Setup Email Full Screen Per Channel ConfigEvent Duration Channel SelectDetection Config Motion Detect IndicatorMotion Detect Alarm Out AlarmSensitivity Block ThresholdTotal / Free Size of HDD Database SetupAvailable Recording Time Internal DisksLoad Factory Default ConfigurationActive ActionExport Configuration Import ConfigurationCopy Destination Configuration NameBegin Export Select Device From / To Time Select ChannelSelect Events Export Format Data TypeDigital Signature Reboot Power OffShutdown Erase DiscSystem Requirements Remote Monitoring SoftwareChange Internet Settings Installation of SoftwareTL H.264 DVR User’s Manual Install SpecoRemote Login / Logout Basic Operation Software UpgradesView Live Video Operating Cameras with Dome Control Select Display ModeRecord Video Instantly Instant RecordingPlayback Instant Recorded Video Playback Remote Video Playback VideoPlayback Controls Playback Local *.drv FilesIcon Name Description Play / PauseSearch from Event List Verify Digital SignatureTake a Snapshot Normal and Dual Streaming Health StatusSpecoRemote Troubleshooting Guide IPhone and Smart Phone Monitoring 101 Brand Model Name Model Number Size Appendix a Recommended HDDsSeagate MaxtorAppendix B Remote Controller 234 235 236 Appendix C Setting up a DVR behind a Router Following is an example of how the router should be set 107