TL H.264 DVR User’s Manual
3.General System Setup
Before operating the DVR, some general configuration should be setup first. The following subsections will introduce function keys on the front panel and general configuration of the DVR.
The regular displayed OSD information and its displayed positions are shown as following figure. Title of the channel will be displayed on the
Ch1 | N |
►*1 | 2008/05/09 PM04:31:22 |
3.1Front Panel Introduction
The front panel controls enable users to control the unit and preset the programmable functions.
3.1.1LED Definition
The LEDs on the front panel of the DVR are described as follow.
Power LED
The LED lights up when the correct power is connected to the unit.
Alarm LED
The LED lights up when an alarm is triggered.
Network LED
The LED lights up when the DVR is connected to a network and blinks when the data is being transferred.
REC LED
The LED blinks while the DVR is recording.
14