Speco Technologies 8TL, 16TL manual Load Factory Default, Import Configuration

TL H.264 DVR User’s Manual

5.8.1Load Factory Default

This item is used to load the factory default setting. Select <Yes> to restore the factory default setting from the read-only memory, or select <No> to cancel.

5.8.2Import Configuration

This item allows users to load a DVR configuration that was saved in an external drive. To import a configuration that was previously exported, make sure the device with the saved configuration is connected to the DVR. Select <Import Config> from the Configuration menu and press ENTER. The following menu is displayed.

	Import Config
Config Name	Select
xxxx-xxxx	No
xxx-xx	No

Press UP/ DOWN to select one of the available configuration files, and choose <Yes> to start importing the configuration.

NOTE: If the record mode and/or number of IP cameras of the imported configuration are different from the DVR’s configuration, the following message will be displayed.

Warning!! System will reboot if

record mode and/or IP camera number

differ.

ENTER: Yes ESC: No

NOTE: DO NOT remove the external device before the DVR completely reboots, otherwise it will be formatted.

77