Speco Technologies 16TL Export Configuration, Copy Destination, Configuration Name, Begin Export

TL H.264 DVR User’s Manual

5.8.3Export Configuration

Users are allowed to save a DVR configuration by exporting it to an external drive, such as an USB Flash Drive. Before exporting the configuration, make sure the device in which the configuration will be saved is attached to the DVR appropriately. Select <Export Config> from the Configuration menu and press ENTER. The following menu is displayed. Items in this menu are described in the following sections.

Export Config

1.Copy Destination

2.Config Name

3. Begin Export No

5.8.3.1Copy Destination

Enter this item to list available destinations (external storage devices) where the configuration can be exported. Press UP/ DOWN to select a destination. Please note that saving a different configuration to the same destination with the same file name will overwrite the previous configuration file without warning.

	Copy Destination
Device Name	Select
xxxx-xxxx	No

NOTE: It is not allowed to select the built-in DVD+RW as a copy destination.

5.8.3.2Configuration Name

This item allows users to assign a name to the exported configuration file. Use the virtual keyboard to enter the configuration file name. Note that the file name can only contain up to 15 characters, with no spaces.

5.8.3.3Begin Export

Select <Yes> to begin exporting the configuration file, or select <No> to exit.

NOTE: It is strongly recommended to export configuration before upgrading the DVR system. Also, backup the configuration routinely is recommended as well, just in case for unexpected situation.

78