Speco Technologies 8TL, 16TL manual Ntsc

Page 66

TL H.264 DVR User’s Manual

5.4.3Preset Record Configuration

The <Preset Config> is used to select the preset recording quality and frame rate. Different preset recording quality levels are offered for users to choose: <Best Quality>, <Standard>, <Extended Record>, <Event Only>, <ezRecord >, <512Kbps DSL>, <256Kbps DSL>, <128Kbps DSL>, and <OFF>. According to various Record modes, the preset configuration options for normal and event status are described in terms of relative recording rate PPS (Picture Per Second) and recording size for each channel in the table below.

These preset conditions <Best Quality>, <Standard>, <Extended Record>, <Event Only>, <ezRecord >, <512Kbps DSL>, <256Kbps DSL>, and < selected, the channels not connected to cameras will not be recorded. In128Kbps DSL> override any other quality and rate settings. Refer to the table below for file sizes of different preset conditions for DVR-16TL. Note that <Event Only> and <ezRecord> are not included in the table because there are further details for these two settings. <Event Only> will be described in <Event Setup> section. <ezRecord> will be explained in <ezRecord Setup> section.

NTSC	720 X 480 @ 60PPS	720 X 240 @ 120PPS	360 X 240 @ 240PPS
PAL	720 X 576 @ 50PPS	720 X 288 @ 100PPS	360 X 288 @ 200PPS
Best	22 KB/Pic	12 KB/Pic	6 KB/Pic
Standard	14 KB/Pic	8 KB/Pic	4 KB/Pic
Extended	6 KB/Pic	4 KB/Pic	2 KB/Pic
512Kbps DSL		4 KB/Pic
256Kbps DSL		3 KB/Pic
128Kbps DSL		2 KB/Pic

NOTE: The total PPS is equally shared by all channels, which means, even if one channel has not been connected with a camera, the channel still reserves its share of PPS. However, if <ezRecord> is other words, the total PPS will be shared by channels with cameras connected only.

65

Image 66

Contents DVR-4TL/8TL/16TL TL H.264 DVR User’s Manual TL H.264 DVR User’s Manual Important Information Table of Content 3.2 5.3 Authority Setup 5.43.1 3.36.2 Connect At BootingSubmit/ Update 6.31.2 Sequence Setup1.1 1.37.7 Database Setup7.6 3.1 Copy Destination 3.2TL H.264 DVR User’s Manual Overview System Setup Position the DVRSelect Video Format Connect Devices to the DVR Rear Panel ConnectionsDVR-4TL DVR-8TL & DVR-16TL General System Setup Front Panel IntroductionLED Definition Function Keys ChannelPLAY/STOP Entering OSD Setup Menu User Management Power Up / Shutdown the DVR System Date / Time Setting Set Date / TimeDaylight Saving Time Network Time Protocol Setup Record Schedule / Quality Setting Schedule SetupPreset Record Configuration Per Camera ConfigurationRecord Event Video Only Basic Operation View Live / Playback VideoViewing Modes View Recorded Video Digital ZoomView Live Cameras Freeze Live ImageKey Usage in Playback Pause Playback and Single Step ForwardSequence Sequence with Main MonitorSequence with Call Monitor Search Recorded Video Search by TimeCalendar Search Search by Event Video Export EzBurn IntroductionExport Normal Video Dome Control Export Event VideoDome Connection Dome Protocol Setup 3 RS485 SetupDome Controlling Keys Setting Preset Points Calling Preset Points Advanced System Configuration Username and PasswordKey Usage in OSD setup menu Direction Keys Key Usage in Virtual KeyboardSystem Setup System/Version InfoSoftware Upgrade via Local Device System and Version InformationLanguage Date / TimeDate / Time Time Zone Date / Time Display Date Display ModeTime Display Mode Date/Time OrderDaylight Saving Time Daylight Saving Time SetupNetwork Time Protocol Setup Setup DST Start / EndAutomatically Time Sync Unit NameNTP Server Manually Time SyncPassword Protection Account SetupNetwork Setup Authority SetupLoad Default Setting LAN Setup LAN SelectNetmask GatewayPPPoE Account PPPoE Password PPPoE Max IdleNetwork Restart Email Address Smtp SetupTrigger Port Email via SmtpSmtp Server Smtp PortSmtp Account Ddns Setup Smtp PasswordEnable Ddns Host Name Ddns PortBaud Rate 7 RS485 SetupUnit ID BitsParity Audio Output/Key BeepStop Audio OutputVGA Resolution Monitor SetupScreen Center Adjust Show Camera TitleAnalog Camera Select Camera SetupShow Color Bar Dome ProtocolBrightness Camera TitleCovert ContrastRecord Setup Saturation9 Hue Record Format Record Mode SettingRecord Resolution Max Rec. PPSDay / Night Time Start / End Weekend ScheduleWeekend Start / End Ntsc Normal Qlty Camera SelectNormal PPS Event Max PPSEzRecord Setup Event QltyEvent Active Data Lifetime Circular RecordingAudio Recording Purge DataSequence Setup Main / Call Monitor DwellMain / Call Monitor Schedule Event Icon Event SetupInternal Buzzer Email NoticeEmail Full Screen Event DurationChannel Select Per Channel ConfigMotion Detect Indicator Video Loss DetectDetection Config SensitivityBlock Threshold Alarm Out Database SetupAlarm Total / Free Size of HDDConfiguration Internal DisksLoad Factory Default Import ConfigurationCopy Destination Export ConfigurationConfiguration Name Begin ExportSelect Device Select Channel From / To TimeSelect Events Data Type Export FormatDigital Signature Shutdown Power OffReboot Erase DiscRemote Monitoring Software System RequirementsInstallation of Software Change Internet SettingsTL H.264 DVR User’s Manual Install SpecoRemote Login / Logout Software Upgrades Basic OperationView Live Video Select Display Mode Operating Cameras with Dome ControlInstant Recording Record Video InstantlyPlayback Instant Recorded Video Playback Video Playback Remote VideoPlayback Local *.drv Files Playback ControlsVerify Digital Signature Search from Event ListTake a Snapshot Health StatusRemote Monitoring Software Trouble Shooting Guide Appendix a Recommended HDDs Appendix B Remote Controller 233 234 235 236 237 238 239 Appendix C Setting up a DVR behind a Router Following is an example of how the router should be set 101