Speco Technologies 16TL, 8TL manual Dome Protocol Setup, 3 RS485 Setup

TL H.264 DVR User’s Manual

4.5.2Dome Protocol Setup

The Dome Protocol item lists the available dome protocols for communicating with dome cameras connected to the DVR. From the Main menu, select <Camera Setup> and press ENTER. The following menu is displayed.

	Analog Camera
1.	Analog Camera Select	CH1
2.	Dome Protocol	None
3.	Dome ID	0
4.	Camera Title
5.	Covert	No
6.	Brightness	0
7.	Contrast	0
8.	Saturation	0
9.	Hue	0
10. Audio Association		Yes

To configure dome protocol, select a camera first and set the communications protocol associated with dome camera using the Direction keys and ENTER.

NOTE: The settings become effective after saving the changes and exiting from the menu.

4.5.3RS485 Setup

The DVR controls the domes via RS-485 communication protocol. The RS-485 parameters in the DVR must be set to the same parameters set in dome camera.

Users are allowed to change the RS-485 settings of the DVR. Select <System Setup> in Main menu, then select <RS485 Setup> from the System Setup menu and press ENTER. The following menu is displayed.

		RS485 Setup
1.	Unit ID	224
2.	Baud Rate	9600
3.	Bits	8
4.	Stop	1
5.	Parity	None

36