Speco Technologies 8TL, 16TL Per Channel Config, Channel Select, Video Loss Detect, Motion Detect

TL H.264 DVR User’s Manual

5.6.7Per Channel Config

This menu is used to set the Video Loss Detect, Motion Detect and Alarm In / Out function for each channel. The menu is displayed as below.

	Per Channel Config
1.	Channel Select	CH1
2.	Video Loss Detect	OFF
3.	Motion Detect	OFF
4.	Motion Detect Indicator	ON
5.	Detection Config
6. Alarm In		OFF
7. Alarm Out		None

5.6.7.1Channel Select

The item is used to select a desired channel for setting the parameters. Move the cursor to <Channel Select> and press ENTER, then select a channel using UP / DOWN keys. Press ENTER again to confirm the selection.

5.6.7.2Video Loss Detect

This item allows users to enable or disable Video Loss as an alarm event. Select <ON> to enable Video Loss alarm events, or <OFF> to disable.

5.6.7.3Motion Detect

This item allows users to enable or disable motion detection function of DVR-4TL/8TL/16TL. Select <ON> to enable Motion Detect alarm events, or <OFF> to disable. If motion detection function is enabled, it is required to define motion detection parameters such as detection area and sensitivity settings in <Detection Config>.

5.6.7.4Motion Detect Indicator

This item allows users to display/ hide the motion detection indicators. Select <ON> to display the indicators, or <OFF> to hide them.

73