Speco Technologies 8TL, 16TL manual System Setup, Position the DVR, Select Video Format

Page 12

TL H.264 DVR User’s Manual

2.System Setup

The notices and introduction on system installation will be described particularly in this chapter. Please follow the description to operate the unit.

In order to prevent the unit from data loss and system damage that caused by a sudden power fluctuation, use of an Uninterruptible Power Supply (UPS) is highly recommended

2.1Position the DVR

First, note to position / mount the DVR in a proper place and be sure to power off the unit before making any connections. The placed location should avoid hindering or blocking the unit from airflow. Enough airflow is needed to protect the unit from overheating. The maximum allowable temperature of operating environment is 40°C.

The unit utilizes heat-conducting techniques to transfer internal heat to the case, especially to the bottom side of the unit.

NOTE: Be sure the rubber feet are not removed, and always leave a space for air ventilation on the unit’s bottom side.

2.2Select Video Format

The DVR is designed to operate under either NTSC or PAL video formats. The switch is on the rear panel.

11

Image 12
Contents DVR-4TL/8TL/16TL TL H.264 DVR User’s Manual TL H.264 DVR User’s Manual Important Information Table of Content 5.3 Authority Setup 5.4 3.13.2 3.3Connect At Booting Submit/ Update6.2 6.3Sequence Setup 1.11.2 1.3Database Setup 7.67.7 3.1 Copy Destination 3.2TL H.264 DVR User’s Manual Overview System Setup Position the DVRSelect Video Format Connect Devices to the DVR Rear Panel ConnectionsDVR-4TL DVR-8TL & DVR-16TL General System Setup Front Panel IntroductionLED Definition Function Keys ChannelPLAY/STOP Entering OSD Setup Menu User Management Power Up / Shutdown the DVR System Date / Time Setting Set Date / TimeDaylight Saving Time Network Time Protocol Setup Record Schedule / Quality Setting Schedule SetupPreset Record Configuration Per Camera ConfigurationRecord Event Video Only Basic Operation View Live / Playback VideoViewing Modes Digital Zoom View Live CamerasView Recorded Video Freeze Live ImageKey Usage in Playback Pause Playback and Single Step ForwardSequence Sequence with Main MonitorSequence with Call Monitor Search Recorded Video Search by TimeCalendar Search Search by Event Video Export EzBurn IntroductionExport Normal Video Dome Control Export Event VideoDome Connection Dome Protocol Setup 3 RS485 SetupDome Controlling Keys Setting Preset Points Calling Preset Points Advanced System Configuration Username and PasswordKey Usage in OSD setup menu Direction Keys Key Usage in Virtual KeyboardSystem Setup System/Version InfoSoftware Upgrade via Local Device System and Version InformationLanguage Date / TimeDate / Time Date Display Mode Time Display ModeTime Zone Date / Time Display Date/Time OrderDaylight Saving Time Setup Network Time Protocol Setup SetupDaylight Saving Time DST Start / EndUnit Name NTP ServerAutomatically Time Sync Manually Time SyncPassword Protection Account SetupNetwork Setup Authority SetupLoad Default Setting LAN Setup LAN SelectNetmask GatewayPPPoE Account PPPoE Password PPPoE Max IdleNetwork Restart Smtp Setup Trigger PortEmail Address Email via SmtpSmtp Server Smtp PortSmtp Account Ddns Setup Smtp PasswordEnable Ddns Host Name Ddns Port7 RS485 Setup Unit IDBaud Rate BitsAudio Output/Key Beep StopParity Audio OutputMonitor Setup Screen Center AdjustVGA Resolution Show Camera TitleCamera Setup Show Color BarAnalog Camera Select Dome ProtocolCamera Title CovertBrightness ContrastRecord Setup Saturation9 Hue Record Mode Setting Record ResolutionRecord Format Max Rec. PPSDay / Night Time Start / End Weekend ScheduleWeekend Start / End Ntsc Camera Select Normal PPSNormal Qlty Event Max PPSEzRecord Setup Event QltyEvent Active Data Lifetime Circular RecordingAudio Recording Purge DataSequence Setup Main / Call Monitor DwellMain / Call Monitor Schedule Event Setup Internal BuzzerEvent Icon Email NoticeEmail Full Screen Event DurationPer Channel Config Motion Detect IndicatorChannel Select Video Loss DetectDetection Config SensitivityBlock Threshold Database Setup AlarmAlarm Out Total / Free Size of HDDConfiguration Internal DisksLoad Factory Default Import ConfigurationExport Configuration Configuration NameCopy Destination Begin ExportSelect Device Select Channel From / To TimeSelect Events Data Type Export FormatDigital Signature Power Off RebootShutdown Erase DiscRemote Monitoring Software System RequirementsInstallation of Software Change Internet SettingsTL H.264 DVR User’s Manual Install SpecoRemote Login / Logout Software Upgrades Basic OperationView Live Video Select Display Mode Operating Cameras with Dome ControlInstant Recording Record Video InstantlyPlayback Instant Recorded Video Playback Video Playback Remote VideoPlayback Local *.drv Files Playback ControlsVerify Digital Signature Search from Event ListTake a Snapshot Health StatusRemote Monitoring Software Trouble Shooting Guide Appendix a Recommended HDDs Appendix B Remote Controller 233 234 235 236 237 238 239 Appendix C Setting up a DVR behind a Router Following is an example of how the router should be set 101