Speco Technologies 8TL, 16TL manual Netmask, Gateway, PPPoE Account

Page 52

TL H.264 DVR User’s Manual

IP

This item is used to configure the IP (Internet Protocol) address of the DVR. The IP address is the identifier for the DVR on a TCP/IP LAN. Please note that to set a static IP address, DHCP must be set to <OFF>.

Netmask

A netmask is a 32-bit mask used to divide an IP address into subnets and specify the networks available hosts. Its value is defined by the network administrator. It takes the form as ***.***.***.***, for example, 255.255.255.0.

This item allows users to enter the value of the Netmask for the DVR. Please note that to configure this item, DHCP must be set to <OFF>.

Gateway

Gateway is a node on a network that serves as an entrance to another network. Users are allowed to specify the IP address of the gateway or router associated with this DVR. To configure this item, DHCP must be set to <OFF>.

DNS

DNS is the abbreviation for “Domain Name Server”, which is an Internet service that translates domain names into IP addresses. The advantage of using DNS is that domain names are easier to remember.

This item allows users to specify the IP address of the Domain Name System associated with the DVR. To configure this item, DHCP must be set to <OFF>.

If the server is unavailable when using DHCP, the DVR will search for the network server and boots up more slowly. This network search continues until it times out.

PPPoE Account

The item allows users to setup the PPPoE login username.

NOTE: For accessing the PPPoE settings, select <PPPoE> as the Network Type in Network Setup menu.

51

Image 52

Contents DVR-4TL/8TL/16TL TL H.264 DVR User’s Manual TL H.264 DVR User’s Manual Important Information Table of Content 5.3 Authority Setup 5.4 3.13.2 3.3Connect At Booting Submit/ Update6.2 6.3Sequence Setup 1.11.2 1.3Database Setup 7.67.7 3.1 Copy Destination 3.2TL H.264 DVR User’s Manual Overview Position the DVR System SetupSelect Video Format Connect Devices to the DVR Rear Panel ConnectionsDVR-4TL DVR-8TL & DVR-16TL Front Panel Introduction General System SetupLED Definition Function Keys ChannelPLAY/STOP Entering OSD Setup Menu User Management Power Up / Shutdown the DVR System Date / Time Setting Set Date / TimeDaylight Saving Time Network Time Protocol Setup Record Schedule / Quality Setting Schedule SetupPreset Record Configuration Per Camera ConfigurationRecord Event Video Only View Live / Playback Video Basic OperationViewing Modes Digital Zoom View Live CamerasView Recorded Video Freeze Live ImageKey Usage in Playback Pause Playback and Single Step ForwardSequence with Main Monitor SequenceSequence with Call Monitor Search Recorded Video Search by TimeCalendar Search Search by Event Video Export EzBurn IntroductionExport Normal Video Export Event Video Dome ControlDome Connection Dome Protocol Setup 3 RS485 SetupDome Controlling Keys Setting Preset Points Calling Preset Points Advanced System Configuration Username and PasswordKey Usage in OSD setup menu Direction Keys Key Usage in Virtual KeyboardSystem Setup System/Version InfoSoftware Upgrade via Local Device System and Version InformationDate / Time LanguageDate / Time Date Display Mode Time Display ModeTime Zone Date / Time Display Date/Time OrderDaylight Saving Time Setup Network Time Protocol Setup SetupDaylight Saving Time DST Start / EndUnit Name NTP ServerAutomatically Time Sync Manually Time SyncPassword Protection Account SetupAuthority Setup Network SetupLoad Default Setting LAN Setup LAN SelectGateway NetmaskPPPoE Account PPPoE Max Idle PPPoE PasswordNetwork Restart Smtp Setup Trigger PortEmail Address Email via SmtpSmtp Port Smtp ServerSmtp Account Smtp Password Ddns SetupEnable Ddns Host Name Ddns Port7 RS485 Setup Unit IDBaud Rate BitsAudio Output/Key Beep StopParity Audio OutputMonitor Setup Screen Center AdjustVGA Resolution Show Camera TitleCamera Setup Show Color BarAnalog Camera Select Dome ProtocolCamera Title CovertBrightness ContrastSaturation Record Setup9 Hue Record Mode Setting Record ResolutionRecord Format Max Rec. PPSWeekend Schedule Day / Night Time Start / EndWeekend Start / End Ntsc Camera Select Normal PPSNormal Qlty Event Max PPSEvent Qlty EzRecord SetupEvent Active Data Lifetime Circular RecordingAudio Recording Purge DataMain / Call Monitor Dwell Sequence SetupMain / Call Monitor Schedule Event Setup Internal BuzzerEvent Icon Email NoticeEmail Full Screen Event DurationPer Channel Config Motion Detect IndicatorChannel Select Video Loss DetectSensitivity Detection ConfigBlock Threshold Database Setup AlarmAlarm Out Total / Free Size of HDDConfiguration Internal DisksLoad Factory Default Import ConfigurationExport Configuration Configuration NameCopy Destination Begin ExportSelect Device From / To Time Select ChannelSelect Events Export Format Data TypeDigital Signature Power Off RebootShutdown Erase DiscRemote Monitoring Software System RequirementsInstallation of Software Change Internet SettingsTL H.264 DVR User’s Manual Install SpecoRemote Login / Logout Basic Operation Software UpgradesView Live Video Select Display Mode Operating Cameras with Dome ControlRecord Video Instantly Instant RecordingPlayback Instant Recorded Video Playback Video Playback Remote VideoPlayback Local *.drv Files Playback ControlsVerify Digital Signature Search from Event ListTake a Snapshot Health StatusRemote Monitoring Software Trouble Shooting Guide Appendix a Recommended HDDs Appendix B Remote Controller 233 234 235 236 237 238 239 Appendix C Setting up a DVR behind a Router Following is an example of how the router should be set 101