TL H.264 DVR User’s Manual
Auto / Enter
•In OSD setup menu interface, the key is used to make selection.
•In Dome Control mode, this key is used to activate automatic focus and iris function.
Iris Close
Use to close the Iris on the dome camera.
Focus Far
Use to focus the selected dome camera far.
Zoom Out
Use to zoom out the dome camera. This function enables users to shrink the current image and view a larger area.
Pan / Tilt
Use to pan and tilt dome camera.
4.5.5Setting Preset Points
The DVR allows users to set preset positions. The amount of preset points depends on the dome manufacturer.
Follow the steps to set preset points.
•Press a Channel key to view the corresponding camera in full screen.
•Then press DOME to enter Dome Control mode. A Hint Screen shown as below figure displays on the screen.
•Press 2 to hide the Dome Control Hint Screen; press 2 again to toggle the Hint Screen.
•Use Direction keys to position the dome camera to desired position.
Hint Screen
DOME / ESC: Exit
MODE / PLAY: Iris Open / Close
SEQ / FREEZE: Focus Near / Far
MENU / SEARCH: Zoom In / Out
ENTER: Auto Focus / Iris
◄▲▼►: Pan / Tilt
CH1: Set / Go Preset
CH2: Hint Screen On / Off
Dome Control
38