Speco Technologies 8TL, 16TL manual Event Setup, Internal Buzzer, Event Icon, Email Notice

Page 72

TL H.264 DVR User’s Manual

5.6Event Setup

This menu allows users to determine DVR-4TL/8TL/16TL behavior in response to alarm events. In the Main menu, move the cursor to <Event Setup> and press ENTER. The following menu is displayed. Items in the Event Setup menu are described in the following subsections.

 

 

Event Setup

1. Internal Buzzer

ON

2.

Event Icon

ON

3.

Email Notice

OFF

4.

Email Attachment

OFF

5.

Event Full Screen

None

6.

Event Duration

20 Sec

7.

Per Channel Config

 

5.6.1Internal Buzzer

This item allows users to enable / disable internal buzzer of DVR-4TL/8TL/16TL. If <ON> is selected, the buzzer is activated in response to alarm events. If <OFF> is selected, the buzzer is not activated.

5.6.2Event Icon

This item enables (ON) / disables (OFF) the display of event icons on the monitor when alarm events occur. The event icons are represented by a character according to the event types respectively. Refer to the following table for association of event icons and event types.

Event Icon

Event Type

AAlarm in event

MMotion detection event

LVideo loss event

5.6.3Email Notice

The item enables (ON) / disables (OFF) the Email notification of an event. When an alarm event is triggered and <Email Notice> is enabled, an e-mail concerning the alarm event will be sent.

NOTE: In order to send an event notification e-mail successfully, ensure that the DVR is connecting to the internet.

71

Image 72
Contents DVR-4TL/8TL/16TL TL H.264 DVR User’s Manual TL H.264 DVR User’s Manual Important Information Table of Content 5.3 Authority Setup 5.4 3.13.2 3.3Connect At Booting Submit/ Update6.2 6.3Sequence Setup 1.11.2 1.3Database Setup 7.67.7 3.1 Copy Destination 3.2TL H.264 DVR User’s Manual Overview System Setup Position the DVRSelect Video Format Connect Devices to the DVR Rear Panel ConnectionsDVR-4TL DVR-8TL & DVR-16TL General System Setup Front Panel IntroductionLED Definition Function Keys ChannelPLAY/STOP Entering OSD Setup Menu User Management Power Up / Shutdown the DVR System Date / Time Setting Set Date / TimeDaylight Saving Time Network Time Protocol Setup Record Schedule / Quality Setting Schedule SetupPreset Record Configuration Per Camera ConfigurationRecord Event Video Only Basic Operation View Live / Playback VideoViewing Modes Digital Zoom View Live CamerasView Recorded Video Freeze Live ImageKey Usage in Playback Pause Playback and Single Step ForwardSequence Sequence with Main MonitorSequence with Call Monitor Search Recorded Video Search by TimeCalendar Search Search by Event Video Export EzBurn IntroductionExport Normal Video Dome Control Export Event VideoDome Connection Dome Protocol Setup 3 RS485 SetupDome Controlling Keys Setting Preset Points Calling Preset Points Advanced System Configuration Username and PasswordKey Usage in OSD setup menu Direction Keys Key Usage in Virtual KeyboardSystem Setup System/Version InfoSoftware Upgrade via Local Device System and Version InformationLanguage Date / TimeDate / Time Date Display Mode Time Display ModeTime Zone Date / Time Display Date/Time OrderDaylight Saving Time Setup Network Time Protocol Setup SetupDaylight Saving Time DST Start / EndUnit Name NTP ServerAutomatically Time Sync Manually Time SyncPassword Protection Account SetupNetwork Setup Authority SetupLoad Default Setting LAN Setup LAN SelectNetmask GatewayPPPoE Account PPPoE Password PPPoE Max IdleNetwork Restart Smtp Setup Trigger PortEmail Address Email via SmtpSmtp Server Smtp PortSmtp Account Ddns Setup Smtp PasswordEnable Ddns Host Name Ddns Port7 RS485 Setup Unit IDBaud Rate BitsAudio Output/Key Beep StopParity Audio OutputMonitor Setup Screen Center AdjustVGA Resolution Show Camera TitleCamera Setup Show Color BarAnalog Camera Select Dome ProtocolCamera Title CovertBrightness ContrastRecord Setup Saturation9 Hue Record Mode Setting Record ResolutionRecord Format Max Rec. PPSDay / Night Time Start / End Weekend ScheduleWeekend Start / End Ntsc Camera Select Normal PPSNormal Qlty Event Max PPSEzRecord Setup Event QltyEvent Active Data Lifetime Circular RecordingAudio Recording Purge DataSequence Setup Main / Call Monitor DwellMain / Call Monitor Schedule Event Setup Internal BuzzerEvent Icon Email NoticeEmail Full Screen Event DurationPer Channel Config Motion Detect IndicatorChannel Select Video Loss DetectDetection Config SensitivityBlock Threshold Database Setup AlarmAlarm Out Total / Free Size of HDDConfiguration Internal DisksLoad Factory Default Import ConfigurationExport Configuration Configuration NameCopy Destination Begin ExportSelect Device Select Channel From / To TimeSelect Events Data Type Export FormatDigital Signature Power Off RebootShutdown Erase DiscRemote Monitoring Software System RequirementsInstallation of Software Change Internet SettingsTL H.264 DVR User’s Manual Install SpecoRemote Login / Logout Software Upgrades Basic OperationView Live Video Select Display Mode Operating Cameras with Dome ControlInstant Recording Record Video InstantlyPlayback Instant Recorded Video Playback Video Playback Remote VideoPlayback Local *.drv Files Playback ControlsVerify Digital Signature Search from Event ListTake a Snapshot Health StatusRemote Monitoring Software Trouble Shooting Guide Appendix a Recommended HDDs Appendix B Remote Controller 233 234 235 236 237 238 239 Appendix C Setting up a DVR behind a Router Following is an example of how the router should be set 101