5 Factory Default Configuration
The following table lists the factory default settings for configuration
DIP SW:
SW | Name | Default Setting |
SW1-2&1 | 4W | 4-wire (RS-485/422 driver receiver separated) |
SW1-3 | T-D(Off) | Disable RS-485/422 receiver terminator |
SW1-4 TXC (Off) | RS-485/422 driver enable control by RTS orADC |
SW1-5 | RTS-D (Off) | Disable RTS control for RS-485/422 driver |
SW1-6 RXC (Off) | RS-485/422 receiver enable control by RTS orADC |
SW1-8&7 BIAS-D (Off) | Disable RS-485/422 line bias |
SW2-1 | SDE (On) | EnableADC control for RS-485/422 driver |
SW2-2 | Off | Disable ADC Timing for RS-232 baud 1200 |
SW2-3 | Off | Disable ADC Timing for RS-232 baud 2400 |
SW2-4 | Off | Disable ADC Timing for RS-232 baud 4800 |
SW2-5 | 9600 (On) | Select ADC Timing for RS-232 baud 9600 |
SW2-6 | Off | Disable ADC Timing for RS-232 baud 19200 |
SW2-7 | Off | Disable ADC Timing for RS-232 baud 38400 |
SW2-8 | Off | DisableADC Timing for RS-232 baud 115200 |
