SW | Name | State | Function |
SW1-2&1 | 4W | Off | 4-wire (RS-485/422 driver receiver separated) |
| 2W | On | 2-wire (RS-485/422 driver receiver connected) |
SW1-3 | T -D | Off | Disable RS-485/422 receiver terminator |
| T -E | On | Enable RS-485/422 receiver terminator |
SW1-4 | TXC | Off | RS-485/422 driver enable control by RTS or ADC |
| TXE | On | RS-485/422 driver is forced to enable |
SW1-5 | RTS-D | Off | Disable RTS control for RS-485/422 TX RX |
| RTS-E | On | Enable RTS control for RS-485/422 TX RX |
SW1-6 | RXC | Off | RS-485/422 receiver enable control by RTS or ADC |
| RXE | On | RS-485/422 receiver is forced to enable. |
SW1-8&7 | BIAS-D Off | RS-485/422 line bias is disabled |
| BIAS-E On | RS-485/422 line bias is enabled |
SW2-1 | SDD | Off | Disable ADC control for RS-485/422 TX RX |
| SDE | On | Enable ADC control for RS-485/422 TX RX |
SW2-2 | 1200 | On | ADC Timing parameter for RS-232 baud 1200 |
SW2-3 | 2400 | On | ADC Timing parameter for RS-232 baud 2400 |
SW2-4 | 4800 | On | ADC Timing parameter for RS-232 baud 4800 |
SW2-5 | 9600 | On | ADC Timing parameter for RS-232 baud 9600 |
SW2-6 | 19200 | On | ADC Timing parameter for RS-232 baud 19200 |
SW2-7 | 38400 | On | ADC Timing parameter for RS-232 baud 38400 |
SW2-8 | 115200 On | ADC Timing parameter for RS-232 baud 115200 |
