08Setting up
Note
•Manual Adjust also allows you to make selections for “Tuner NR”, “Child Lock”, and “High Deviation”. See Reducing video noise, Setting Child Lock, and Suppressing audio distortion respectively.
•This plasma television is equipped with the auto frequency tuning function that automatically adjusts tuning frequencies according to received signals. For this reason, the Manual Adjust menu may show slightly different frequencies from your entry when you access the menu next time. You cannot deactivate the Auto Frequency Tuning function.
Reducing video noise
For the individual channels, you can specify whether the plasma television should reduce video noise depending on the levels of broadcasting signals.
1Press HOME MENU.
2Select “Setup“ (/ then ENTER).
3Select “Analogue TV Setup“ (/ then ENTER).
The password entry screen appears. Enter your
4Select “Manual Adjust“ (/ then ENTER).
5Select “Programme Entry“ (/).
6Select a programme number (/). You can select 1 through 99.
7Select “Tuner NR“ (/).
8Select “On“ (/).
| Colour System | Auto |
|
|
|
|
|
| Store | Yes |
|
|
|
|
|
| Tuner NR | On |
|
|
|
|
|
| Child Lock | View |
|
|
|
|
|
| High Deviation | Off |
|
|
|
|
|
9 Press HOME MENU to exit the menu.
Note
•This function may not achieve a satisfactory result, depending on the conditions of broadcasting signals.
•The factory default is “On”.
Setting Child Lock
Child Lock inhibits selected TV channels from being tuned and watched.
1Repeat steps 1 to 6 provided for Reducing video noise. After selecting a programme number (using Programme Entry), perform the following steps:
2Select “Child Lock“ (/).
3Select “Block“ (/).
•The selection is switched between “View” (factory default) and “Block”.
4Press HOME MENU to exit the menu.
Suppressing audio distortion
You can suppress audio distortion that may be induced when too strong audio signals are received in the selected channel.
Note
•High Deviation is selectable only when you have selected “D/K” for “System” under Setting up analogue TV channels manually on page 27.
1Repeat steps 1 to 6 provided for Reducing video noise. After selecting a programme number (using Programme Entry), perform the following steps:
2Select “High Deviation“ (/).
3Select “High”, “Mid” or “Low” (/).
Item | Description |
Off | Deactivates the function |
|
|
High | Suppresses audio distortion slightly; however, the |
| audio volume is slightly lowered than when Off is |
| selected |
|
|
Mid | Suppresses audio distortion moderately |
|
|
Low | Suppresses audio distortion further; however, the |
| audio volume is further lowered |
|
|
4 Press HOME MENU to exit the menu.
Note
•While watching a TV channel with any High Deviation setting, you cannot change the sound multiplex mode.
28
En