Pioneer PDP-508XDA, PDP-428XDA manual Setting up Sound adjustments, Sound Effect, SRS Focus, Srs

Setting up

Sound adjustments

You can adjust the sound quality to your preference with the following settings.

Adjust the sound to your preference for the chosen AV Selection option. See page 30.

1Press HOME MENU.

2Select “Sound“ (/ then ENTER).

3Select an item to be adjusted (/).

4Select the desired level (/).

Sound	STANDARD
Treble		2
Bass		0
Balance		0
Reset
Sound Effect
Headphone Output		Main
Sub Volume		30

Item	 button	 button
Treble	For weaker treble	For stronger treble
Bass	For weaker bass	For stronger bass
Balance	Shifts the audio balance to	Shifts the audio balance to
	the left	the right

5 Press HOME MENU to exit the menu.

Note

•You cannot adjust the sound for listening with headphones.

•If you perform sound adjustments with headphones connected, the new settings will become effective as soon as you disconnect the headphones.

•To restore the factory defaults for all items, press / to

select “Reset” in step 3, and then press ENTER. A confirmation screen appears. Press / to select “Yes”, and then press

ENTER.

Sound Effect

You can select from SRS FOCUS, SRS or SRS TruBass.

1Press HOME MENU.

2Select “Sound” (/ then ENTER).

3Select “Sound Effect” (/ then ENTER).

4Select “SRS FOCUS”, “SRS” or “SRS TruBass” (/).

5Select the desired parameter (/).

08

SRS FOCUS

Selections	Off	Deactivates SRS FOCUS®
	On	Activates SRS FOCUS®
		Shifts the apparent direction of the sound
		upward for more clearly defined sound

SRS

Selections	Off	Deactivates SRS®
	On	Activates SRS®
		Reproduces highly effective three-
		dimensional sound

SRS TruBass

Selections	Off	Deactivates SRS TruBass®
	On	Activates SRS TruBass®
		Provides deep, rich bass using a new
		technology

6 Press HOME MENU to exit the menu.

Note

• (WOW) denotes a status where SRS FOCUS®,

SRS® and SRS TruBass® are on.

•You can also press (Sound Effect) on the remote to change the selection.

•You cannot adjust the sound effect for listening with headphones.

•If you change the sound effect with headphones connected, the new setting will become effective as soon as you disconnect the headphones.

•The effect of this function differs depending on signals.

Listening to audio from the sub screen using headphones

With headphones connected, you can listen to audio coming from the sub screen when in the 2-screen or picture-in-picture mode; audio coming from the main screen is output from the speakers.

1Press HOME MENU.

2Select “Sound“ (/ then ENTER).

3Select “Headphone Output” (/).

4Select the desired parameter (/).

Sound Effect
Headphone Output		Main
Sub Volume	30

Headphone Output

Selections	Main	Audio coming from the main screen is
	(default)	output from the PHONES output terminal
	Sub	When in the 2-screen or picture-in-picture
		mode, audio coming from the sub screen is
		output from the PHONES output terminal

35

En