Using with other equipment

Note

•It may take a short while until the image is displayed, depending on the equipment connected.

•Make sure to use an HDMI compliant cable.

•When inputting 1080p signals, we recommend you use an HDMI cable that supports HDMI Category 2.

•When connecting a PC to the HDMI terminal, use the HDMI compliant PC or video card.

•When connecting a PC to the HDMI terminal using a DVI output terminal, the plasma television may not display properly. If that is the case, consult with your PC manufacturer.

•PC picture and/or sound may not be displayed or heard properly depending on the PC used.

Connecting HDMI equipment

For INPUT 3, connect an HDMI cable for the video and (if necessary) a stereo audio cable for analogue audio. You can select the audio and video format according to the device you have connected - see below for more.

Activating the INPUT 3 HDMI terminal

1Press HOME MENU.

2Select “Option“ (/ then ENTER).

3Select “HDMI Input“ (/ then ENTER).

4Select “Setting“ (/ then ENTER).

5Select “Enable“ (/ then ENTER).

ItemDescription

Disable (default) Deactivates the INPUT 3 HDMI terminal

Enable	Activates the INPUT 3 HDMI terminal

6 Press HOME MENU to exit the menu.

Note

•You need not activate the INPUT 4 and INPUT 5 HDMI terminals.

(Rear view)

MONITOR SUB

OUT WOOFER

DIGITAL

OUT

OPTICAL

	Stereo audio	HDMI compliant cable
		(HDMI cable having the
	cable
		HDMI mark)

HDMI device

For INPUT 4 and INPUT 5, connect just an HDMI cable - this carries both the audio and video signals.

(Rear view)

(When connected to INPUT 5)

HDMI compliant cable

(HDMI cable having the

HDMI mark)

HDMI device

Specifying the type of input signals

1Repeat steps 1 to 3 provided for Activating the INPUT 3 HDMI terminal.

2Select “Signal Type” (/ then ENTER).

3Select “Video” or “PC” (/ then ENTER).

Item	Description
Video (default)	Select this option except when a PC is connected

PC	Select this option when a PC is connected to the HDMI
	input terminal

4 Press HOME MENU to exit the menu.

Caution

•Make sure to select “PC” when a PC is connected to the HDMI input terminal.

Note

•In the “Video” mode, the image is “over-scanned” (enlarged), and the mode is automatically switched to “PC” when PC signals are received.

•In the “PC” mode, the image is displayed in full size for optimum image quality.

when “Video” is selected	when “PC” is selected
(“overscan” size screen)	(“underscan” size screen)