Enjoying DTV broadcasts
Quick Scan
If you live in one of the cities or regions listed in the “Quick Scan” menu, select your city or region and start scanning all available digital channel signals.
1Press HOME MENU.
2Select “Setup” (/ then ENTER).
3Select “DTV Setup” (/ then ENTER).
4Select “Installation” (/ then ENTER).
•The password entry screen appears. Enter your
5Select “Quick Scan” (/ then ENTER).
•Select your city or region from Adelaide, Brisbane, Melbourne, Perth, Sydney, Batchelor, Canberra, Darwin, Newcastle, Wollongong, Hobart or HobartNE.
09
Auto Scan
Auto Scan searches for digital programmes on receivable channels through the VHF and UHF bands without designating the city or region you live in.
1Press HOME MENU.
2Select “Setup” (/ then ENTER).
3Select “DTV Setup” (/ then ENTER).
4Select “Installation” (/ then ENTER).
•The password entry screen appears. Enter your
5Select “Auto Scan” (/ then ENTER).
•A confirmation screen appears.
Quick Scan
Quick Scan
Auto Scan
Manual Scan
Clear All Data
Quick Scan |
Adelaide |
Brisbane |
Melbourne |
Perth |
Sydney |
Batchelor |
Canberra |
Auto Scan
Manual Scan
Clear All Data
Auto Scan will take more than 10 minutes.
Do you want to continue?
Yes No
6 Select “Yes” to start “Auto Scan” (/ then ENTER). |
• The tuner starts scanning from channel 6 to channel 69. The |
6Select the city or region (/ then ENTER).
•Channel search automatically starts. If any new channel is found, it is automatically registered on the plasma television.
Scan Status | CH 8 | |
Scan Percentage |
| |
Signal Strength |
| 10% |
| ||
|
|
|
•To quit a channel scan in progress, press RETURN. If you quit scanning halfway, all channels may not be registered properly. Make sure to repeat scanning again until it is completed.
Note
•You can select “DTV Setup” only while viewing DTV channels.
•If the city or region where you live in is not on the list, select “Auto Scan”.
•The channel frequencies in each city/region are preset in the tuner’s database. If the frequency is changed by the local TV station or a new channel commences broadcasting, you will have to find these channels using Manual Scan (see page 42) or Auto Scan.
percentage bar shows the progress. |
Scan Status | 9/69 |
Scan Percentage |
|
Signal Strength | 0% |
|
|
•If any new channel is found, it is automatically registered on the plasma television.
Channel 9 | found... |
001 |
|
002 |
|
003 |
|
004 |
|
005 |
|
006 |
|
Scan Status | 9/69 |
Scan Percentage |
|
Signal Strength | 0% |
41
En