11Using with other equipment
Specifying the type of digital video signals
1Press HOME MENU.
2Select “Option“ (/ then ENTER).
3Select “HDMI Input“ (/ then ENTER).
4Select “Video“ (/ then ENTER).
5Select the type of digital video signals (/ then ENTER).
•If you select “Auto”, an attempt will be made to identify the type of digital video signals when digital video signals are received.
Using control cords
Connect control cords between the plasma television and other Pioneer equipment having the tlogo to be able to operate the connected equipment via the remote control sensor on the plasma television.
After the CONTROL IN terminals have been connected, the remote control sensors on the connected equipment do not accept commands from the remote control units. Face the remote control units to the remote control sensor on the plasma television when operating the connected equipment.
Item | Description |
Auto (default) | Automatically identifies input digital video signals |
|
|
Digital Component Video signals (4:2:2) locked | |
|
|
Digital Component Video signals (4:4:4) locked | |
|
|
Digital RGB signals (16 to 235) locked | |
|
|
Digital RGB signals (0 to 255) locked | |
|
|
6 Press HOME MENU to exit the menu.
Note
•If you select a parameter other than “Auto”, make such a setting that results in natural colour.
•If no image appears or images appear in inappropriate colours, specify another digital video signal type.
•For the digital video signal types to be specified, check the operation manual that came with the connected equipment.
(Rear view)
a
b
c
CONTROL IN 
OUT
CONTROL IN 
OUT
CONTROL IN 
OUT
Specifying the type of audio signals
When using the INPUT 3 HDMI terminal, you need to specify the type of audio signals.
1Repeat steps 1 to 3 provided for Specifying the type of digital video signals.
2Select “Audio“ (/ then ENTER).
3Select the type of audio signals (/ then ENTER).
•If you select “Auto”, an attempt will be made to identify the type of audio signals when audio signals are received.
Item | Description |
Auto (default) | Automatically identifies the input signals |
|
|
Digital | Accepts digital audio signals |
|
|
Analogue | Accepts analogue audio signals |
|
|
4 Press HOME MENU to exit the menu.
Note
•The INPUT 4 and INPUT 5 HDMI terminals accept only digital audio signals.
•If no sound is output, specify another audio signal type.
•For the audio signal types to be specified, check the operation manual that came with the connected equipment.
•Depending on the equipment to be connected, you also need to connect analogue audio cables.
56
When SR+ is not used (a, b and c):
The control cables (commercially available) are mono sound cables with mini plugs (no resistance).
When SR+ is used (a):
Use the SR+ cable (available as option).
Note
•Make sure that the power cord is removed from the power outlet when making connections.
•Complete all component connections before making control cord connections.
About SR+
The CONTROL OUT terminal supports SR+ to allow linked operations with a Pioneer AV receiver. SR+ features functions such as automatic input switching and DSP surround mode display.
For more information, see the user’s manual for the Pioneer AV receiver supporting SR+.
Note
•Use special SR+ cables available from Pioneer for the connection.
•When using SR+, connect the plasma television directly to the receiver with the SR+ cable.
•When connected with SR+, the volume of the plasma television is temporarily muted.
En