08Setting up
Mosquito NR
Reduces mosquito noise in DVD and
Selections | Off | Deactivates Mosquito NR |
|
|
|
| On | Activates Mosquito NR |
|
|
|
7 Press HOME MENU to exit the menu.
Using the 3DYC and I-P Mode
1Press HOME MENU.
2Select “Picture“ (/ then ENTER).
3Select “Pro Adjust“ (/ then ENTER).
4Select “Others“ (/ then ENTER).
5Select “3DYC” or
6Select the desired parameter (/ then ENTER).
3DYC
Optimizes characteristics for separating brightness signals and colour signals. This works for both video and still images.
Selections | Off | Deactivates 3DYC |
|
|
|
| High | Enhanced 3DYC |
|
|
|
| Mid | Standard 3DYC |
|
|
|
| Low | Moderate 3DYC |
|
|
|
I-P Mode
Performs optimum conversion from interlace signals to progressive signals. This works for both video and still images.
Selections | 1 | Optimum for video images |
|
|
|
| 2 | Standard setting |
|
|
|
| 3 | Optimum for still images |
|
|
|
7 Press HOME MENU to exit the menu.
Note
•The 3DYC setting is ineffective when SECAM,
•For the
•The
•For the 3DYC, the individual parameters are selectable only when you have selected the analogue tuner, or you have selected “INPUT 1”, “INPUT 2”, “INPUT 3” or “INPUT 6” as the input source and there is a video signal present.
34
Comparing picture adjustments on the screen
During picture adjustments, you can quickly refer to the image previously set in the same parameter, allowing you to easily compare and select the preferred image quality.
1Press HOME MENU.
2Select “Picture” (/ then ENTER).
3Select an item to be adjusted (/ then ENTER).
4While performing adjustment, press BLUE on the remote control unit.
“Before” displays and the image adjusted last time appears for comparison.
Before
5Press the button again to return to the newly adjusted image.
Each press of the button toggles between “Before” and “After”.
6Repeat steps 1 and 5 for other parameters.
7Press HOME MENU to exit the menu.
Caution
•If you exit the menu by pressing HOME MENU or no operation is performed for 60 seconds, all the parameter settings displayed last are stored in memory.
•If you want to exit the menu without performing the adjustments (or leaving the settings disabled) on the “After” screen, switch to “Before” and then exit.
Note
•You cannot adjust any item while on the “Before” screen. A warning message appears.
•When you switch to another parameter, make sure to change the display from “Before” to “After” first, otherwise you cannot select “Before”. A warning message appears if you don’t.
•If you exit the selection from the “Before” screen, the previous entry is stored in the memory and the button no longer works.
•If you exit the selection from the “After” screen, the new entry is stored in the memory and the button no longer works.
•If you move and change the “AV Selection” parameter, the new entry in the current parameter is stored in the memory and the button continues to work.
•You cannot compare images between different parameters on the “AV Selection” menu (“STANDARD” and “MOVIE”, for example).
•When you select this function, “Intelligent Mode” for “Pro Adjust” on the “Picture” menu, “OPTIMUM” on the “AV Selection” menu, and “Room Light Sensor” on the “Option” menu are all set to off and image quality returns to default settings.
•This function is not selectable:
-when you select “AV Selection”,
-when you select “Yes” or “No” on the confirmation screen for “Reset” from the “Picture” menu or
-when you select a menu from the PC source
En