Pioneer PDP 424MV Part Names and Function, Front View, Turns the monitor’s power on and off

Page 12

Part Names and Function

Front View

English

qPower ( )

Turns the monitor’s power on and off.

wRemote sensor window

Receives the signals from the remote control.

eSTANDBY/ON indicator

When the power is on ............................. Lights green. When the power is in the standby mode ... Lights red.

rINPUT/EXIT Switches the input.

The available inputs depend on the setting of “BNC INPUT”, “RGB SELECT” and “DVI SET-UP”. Functions as the EXIT buttons in the On-Screen Display (OSD) mode.

tLEFT/– and RIGHT/+

Functions as the CURSOR ( / ) buttons in the On- Screen Display (OSD) mode.

yVOLUME and

Adjusts the volume. Functions as the CURSOR (▲/ ▼) buttons in the On-Screen Display (OSD) mode.

uMENU/SET

Sets the On-Screen Display (OSD) mode and displays the main menu.

WARNING

The Power on/off switch does not disconnect the plasma display completely from the supply mains.

Part Names and Function

Image 12

Contents PDP-424MV Operating Instructions Precautions Important InformationRisk of Electric Shock Do not Open Plasma monitor cleaning procedure To avoid damage and prolong operating lifeRecommendations to avoid or minimize phosphor burn-in Declaration of Conformity Important Safety Instructions S021EF Contents Installation Ventilation Requirements for enclosure mountingVideo signal PC/COMPONENT signal Creating a video wallCable Management ClampHow to use the remote control Battery Installation and ReplacementUsing the wired remote control mode Handling the remote controlTurns the monitor’s power on and off Receives the signals from the remote controlPart Names and Function Front ViewRear View/ Terminal Board Remote Control Basic Operations When viewing videos or digital video discs Wide OperationsScreen Size Operation with Computer Signals When wide signals are input Supported resolution Size screen 43 or SxgaSetting the language for the menus Advanced menu mode Language settings Menu OperationsReset Menu Tree Restoring the factory default settings Picture Settings Menu Adjusting the pictureSetting the color temperature Reducing noise in the pictureAdjusting the color to the desired level Making the Low Tone adjustmentsAdjusting the colors Changing the Gamma CurveSound Settings Menu Screen Settings MenuSetting the allocation of the audio connectors Adjusting the Position, Size, PHASE, ClockOption1 Settings Menu Setting the on-screen displaySetting the PC2/COMPONENT2 connectors Checking the signal being transmitted to PC1 terminalSetting high definition images to the suitable screen size Setting the Input SkipResetting to the default values Input Skip settingsOption2 Settings Menu Setting the power management for computer imagesSTANDBY/ON indicator Setting the picture to suit the movie Orbiter settings Orbiter Function settings Inverse Settings Setting the timeSetting the gray level for the Side Mask Soft Focus settings Side Mask settings Screen WiperOption3 Settings Menu Setting the screen size for S1/S2 video inputSetting the signal and black level for DVI signal Using the timerSetting the power on mode Enabling/disabling the front panel controlsEnabling/disabling remote control wireless transmission Loop Out settingID number setting Video Wall setting Divider settings Video Wall Position settings DISP. Mode settings Auto ID settings Screen settings ABL Link settings P. on Delay settings ScreenAdvanced OSD Settings Menu Color System Settings MenuSetting the menu mode Setting the video signal formatMini D-Sub 15-pin connector Analog DVI-D 24-pin connector DigitalPin Assignments Table of Signals Supported Supported resolutionComputer input signals supported by this system English Troubleshooting Symptom Checks RemedySpecifications Signals